5A AC Current Sensor ZMCT103C Transformer Module

@ TECH HALLROAD

The ZMCT103C is a 5A current transformer module that can use to measure AC current in a variety of applications. ZMCT103C Current Sensor is base on the ZMCT103C IC, which has a turn ratio of 1:2500.

 120.00

In stock

SKU: R4C2-7 Category: Tag:

5A AC Current Sensor ZMCT103C Module is equipped with the ZMCT103C series of small high-precision current transformers and high-precision op amp circuits for accurate sampling and proper compensation of signals.

The ZMCT103C module can interface with a microcontroller or Arduino UNO by connecting the VCC, OUT, and GND pins to the corresponding pins on the microcontroller or Arduino UNO. The ZMCT103C module can also use with a potentiometer to adjust the amplification factor.

This ZMCT103C Current Sensor is a precision current sensor module that can measure up to 5 Amps of AC current. ZMCT103C 5A Module has a small size and high accuracy, and it is available in epoxy encapsulation. The ZMCT103C 5A module detects and generates analog output signals proportional to the AC current flowing via the wire.

The generated output signal can display by using either an ammeter or control/monitoring system in digital form. It is convenient for signal acquisition of AC power within 5A. The corresponding output analog AC signal can be adjusted.

ZMCT103C Current Sensor 5A range of single-phase ac current sensor module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. The ZMCT103C module can measure within 5A current communication, corresponding to output analog quantity can adjust

ZMCT103C Current Sensor has Onboard sampling resistor and precision microcurrent transformer do accurate sampling for the signal and appropriate compensation, and other functions.

.During measurement, the signal conductor to be tested passes through the transformer hole, VCC and GND are connected to the DC 5-30V power supply, VOUT and GND are connected to the oscilloscope, and the potentiometer is adjusted to get the waveform you want.

The amplitude of the waveform will follow The measured current increases and increases, but the maximum does not exceed 1/2VCC.

Features: –

The ZMCT103C is a 5A current transformer module that can use to measure AC current in a variety of applications. ZMCT103C Current Sensor is base on the ZMCT103C IC, which has a turn ratio of 1:2500. This means that for every 1A of current flowing through the primary winding of the module, the output voltage will be 2.5mV. Here are some of the features of the ZMCT103C current sensor module:

  • High precision
  • Wide range
  • Low noise
  • Easy to use
  • Epoxy encapsulation

5A AC Current Sensor ZMCT103C Specifications: –

The ZMCT103C 5A current transformer module works on the principle of magnetic induction. The ZMCT103C module has a turn ratio of 1:2500. This means that for every 1A of current flowing through the primary winding, the output voltage will be 2.5mV. The ZMCT103C 5A current sensor module has the following specifications:

  • Rated input current: 5A
  • Turn ratio: 1:2500
  • Output voltage: 2.5mV/A
  • Precision: 0.2%
  • Noise level: 20µVrms
  • Operating voltage: 5V or 3.3V
  • Dimensions: 18.3 x 17mm

5A AC Current Sensor ZMCT103C Applications : –

The ZMCT103C 5A Current Sensor Module is a versatile and accurate current sensor that can use in a variety of applications, including:

  • Current measurement
  • Power measurement
  • Motor control
  • Automation
  • Safety systems
Package: –

1 x 5A AC Current Sensor ZMCT103C

Related Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “5A AC Current Sensor ZMCT103C Transformer Module”

Vendor Information

  • Store Name: TECH HALLROAD
  • Vendor: TECH HALLROAD
  • Address:
  • No ratings found yet!
5A AC Current Sensor ZMCT103C Transformer Module
5A AC Current Sensor ZMCT103C Transformer Module

 120.00

Majju PK
Logo
Reset Password
Shopping cart