Arduino Nano i/o Expansion Sensor Shield Board V1.1

@ MODERN HALLROAD

This Arduino Nano i/o Expansion Sensor Shield Board V1.1 is designed especially for Nano, solves the problem of wiring confusing when a variety of sensors connected. Nano Breakout Board Lead out all digital 10 port and analog 10 port, each one with standard positive and negative power interface.

 250.00

Category:

This Arduino Nano i/o Expansion Sensor Shield Board V1.1 is designed especially for Nano, solves the problem of wiring confusing when a variety of sensors connected. Nano Breakout Board Lead out all digital 10 port and analog 10 port, each one with standard positive and negative power interface.

Expand your Arduino board with the sensor you prefer! Easy and straightforward connectivity with every Gravity sensor.

Arduino Nano i/o Expansion Sensor Shield Board V1.1 Lead out the 12C interface of the mainboard for a convenient connection. Arduino Nano Prototype Board is Increasing the DC power supply interface. Nano USB interface supply current is actually only SOMA, to bring high-current devices, such as the steering, is obviously insufficient. So in the DC power connector provide external power supply to ensure the stability of equipment operation.

The Arduino Nano i/o Expansion Sensor Shield Board V1.1 is an expansion board for the Arduino Nano boards. There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino UNO/ Arduino Leonardo. In addition, the sensor shield adopts Gravity interface that each pinout includes 5V and GND pins for easy connection to Gravity sensors or servos. To the best compatibility, the shield supports jumper wires for rapid prototyping.

This unit comes fully assembled. The board also has a space specifically for Bluetooth module and ACP220. Several I2C pins are also expanded.

The shield has independent power supply to provide extra power for servo and other sensors.

Each Arduino (I/O) Pin including the 5V DC and GND pins are available for easy connection to the sensors and other devices. The board enables the easy interface of many devices and sensors which includes various power voltage options. 

Features: –

  • Expansion shield for Arduino Nano
  • Pin out for 14 digital input/output pins
  • Pin out for 6 PWM outputs
  • FTDI 4 pins jack
  • Pin out for 8 analog inputs
  • Pin out for I2C Interface
  • Standard Arduino pins
  • More GVS extended pins.
  • Increased DC Power supply Interface
  • Power jack
  • Reset button
  • LED for power indicator
  • AMS1117 3.3V Output Voltage
  • Also compatible with Arduino UNO after soldering pin headers to this shield

Arduino Nano i/o Expansion Sensor Shield Board V1.1 Specifications: –

  • All I/O pins including 5V DC and GND Pins (5V-I/0-GND)
  • On-Board TX/RX/5V/GND Connector for Serial Interface
  • On-Board I2C Connector (A5SCL- A4SDA-5V-GND)
  • 2x Connector for Power Output: VD (Input Supply After Diode), 5V DC, 3.3V DC)
  • Supply Input 7V to 24V DC Using DC Jack or Header Connector
  • On-Board 5V Regulator L317-Adj (Output Set to 5V)
  • On-Board 3.3V Regulator LM1117-3.3V
  • Reverse Supply Protection Diode on Power Input
  • On-Board Power LED
  • On-Board DC Jack for Power Input 7V-24V DC
  • PCB Dimensions 62.55 x 48.90mm
  • Optional 4 Pin Header Connector for Power Input
  • On-Board Reset Switch

Related Documents

Package: –

1 x Arduino Nano i/o Expansion Sensor Shield Board V1.1 Specifications: –

Related Products at majju.pk

Vendor Information

  • Store Name: MODERN HALLROAD
  • Vendor: MODERN HALLROAD
  • Address:
  • No ratings found yet!
Arduino Nano i/o Expansion Sensor Shield Board V1.1
Arduino Nano i/o Expansion Sensor Shield Board V1.1

 250.00

Majju PK
Logo
Reset Password
Shopping cart