Name: BMP180 Barometric Pressure Sensor Module for Arduino
SKU: 18393
Price: 250.00 PKR
Availability: OutOfStock

BMP180 Barometric Pressure Sensor Module is compatible measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications.

By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve an accuracy of 1m, with the noise of only 17cm in ultra-high-resolution noise.

The BMP180 Barometric Pressure Sensor Module is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smart phones, tablet PCs and sports devices.

It follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces. The ultra-low power consumption down to 3 µA makes the BMP180 Barometric Pressure Sensor Module the leader in power saving for your mobile devices. BMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.

The BMP180 Barometric Pressure Sensor Module will operate at the only 0.3uA meaning low current draw for battery-powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull-ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

Features: –

Digital two wire (I²C, TWI, “Wire”) interface
Wide barometric pressure range
Flexible supply voltage range (1.8V to 3.6V)
Ultra-low power consumption
Low noise measurements
Factory-calibrated
Includes temperature sensor
Low-profile with a small footprint

BMP180 Barometric Pressure Sensor Module Specifications: –

Operating voltage of BMP180: 1.3V – 3.6V
Input voltage of BMP180MODULE: 3.3V to 5.5V
Peak current : 1000uA
Consumes 0.1uA standby
Maximum voltage at SDA , SCL : VCC + 0.3V
Operating temperature: -40ºC to +80ºC

Pin Configuration: –

Pin Name	Description
VCC	Connected to +5V
GND	Connected to ground.
SDA	Serial Data pin (I2C interface)
SCL	Serial Clock pin (I2C interface)
3.3V	If +5V is not present. Can power module by connecting +3.3V to this pin.