Name: ESP-12e ESP8266 WIFI Module Wireless loT Board Module
SKU: R16C2-5
Price: 300.00 PKR
Availability: InStock

The ESP-12E ESP8266 is a low-cost, low-power Wi-Fi module that is use in a variety of IoT applications. ESP8266 12E WIFI Module is a System on Chip (SoC) that integrates the Wi-Fi radio, microcontroller, and memory. The ESP-12E is available in a module form factor, which makes it easy to use with other microcontrollers.

The ESP8266 ESP-12E is a versatile and powerful Wi-Fi module that can use in a variety of IoT applications. ESP-12E Module is a great option for budget-minded projects and for developers who want to get started with IoT development.

The ESP-12E operates at a voltage of 3.3V, ESP-12E has a maximum input voltage of 3.6V. If you exceed this voltage, you can damage the module. It is important to note that the ESP-12E’s I/O pins can only accept a maximum voltage of 3.6V. This means that you cannot connect the I/O pins to devices that output a higher voltage. If you do, you can damage the module.

The ESP-12E is power by a Tensilica L106 32-bit MCU. This MCU is known for its low power consumption and high performance. The ESP-12E has 4MB of flash memory. This is enough to store the firmware and any other data that you need to store on the module.

The ESP-12E ESP8266 Wi-Fi Module can addressed over both SPI and UART protocols. SPI is a synchronous serial communication protocol that is often use for high-speed data transfer. UART is an asynchronous serial communication protocol that is often use for low-speed data transfer.

The ESP-12E has 11 GPIO pins, which can use to connect to sensors, actuators, and other devices. The GPIO pins can configure as inputs or outputs, and they can use to read data from or control other devices.

Features : –

The ESP8266 12E WIFI Module also has a built-in TCP/IP stack, which makes it easy to connect to the internet. The TCP/IP stack provides a number of features, such as DNS resolution, DHCP, and HTTP, which can use to develop web applications.

The ESP8266 12E WIFI Module is a low-cost, low-power Wi-Fi chip that is popular for IoT applications. ESP 12 WIFI Module is easy to use and has a wide range of features. The ESP-12E has a number of benefits that make it a popular choice for IoT developers:

Low cost
Low power consumption
Small size
Versatile
Easy to use
Open source

ESP-12e ESP8266 WIFI Module Specifications : –

The ESP-12E operates at a voltage of 3.3V. The ESP 12 WIFI Module can operate in temperatures ranging from -40°C to 85°C. This makes it a versatile module that can use in a variety of environments.

The ESP 12 WIFI Module also has a number of other features, such as an integrated TCP/IP stack and a deep sleep mode. The TCP/IP stack makes it easy to connect the ESP-12E to the internet, and the deep sleep mode can be used to further reduce power consumption. Here are the specifications of the ESP-12E:

CPU: Tensilica L106 32-bit MCU
Clock speed: 80MHz
Flash memory: 4MB
Operating voltage: 3.3V
Operating temperature: -40°C to 85°C
Dimensions: 28mm x 16mm x 3mm
Wi-Fi: IEEE 802.11 b/g/n
Antenna: PCB-on-board antenna
I/O pins: 11
Other features: Integrated TCP/IP stack, deep sleep mode

ESP-12e ESP8266 WIFI Module Pin Descriptions : –

The ESP-12E supports the IEEE 802.11 b/g/n Wi-Fi standards. This means that it can connect to most Wi-Fi networks. The ESP-12E has a PCB-on-board antenna. This antenna is sufficient for most applications, but you can also connect an external antenna for better performance.

The ESP-12E has 11 I/O pins. These pins can use to connect to other devices, such as sensors, actuators, and displays. The ESP-12E also has a number of other features, such as an integrated TCP/IP stack and a deep sleep mode. The TCP/IP stack makes it easy to connect the ESP-12E to the internet, and the deep sleep mode can use to further reduce power consumption. here is a pin description of the ESP-12E:

GND: Ground pin.
3V3: 3.3V power supply pin.
CH_PD: Chip enable pin. This pin must be pulled high to enable the ESP-12E.
RST: Reset pin. This pin can use to reset the ESP-12E.
GPIO15: GPIO pin. This pin can use as a general-purpose input/output pin.
GPIO2: GPIO pin. This pin can use as a general-purpose input/output pin.
GPIO0: GPIO pin. This pin is use to select the boot mode of the ESP-12E.
TXD: Serial TX pin. This pin can use to transmit data from the ESP-12E to another device.
RXD: Serial RX pin. This pin can use to receive data from another device to the ESP-12E.
Vin: Input voltage pin. This pin can use to supply power to the ESP-12E from an external source.
GND: Ground pin.

ESP-12e ESP8266 WIFI Module Applications : –

The ESP 12 WIFI Module can be used for a variety of other IoT projects, such as creating a weather station, monitoring air quality, or controlling a robot. The ESP8266 12E WIFI Module can use to automate industrial processes. The ESP 12 WIFI Module is a versatile Wi-Fi module that can be used in a variety of applications. Here are some of the most common applications: