FC-37 Rain Detection Sensor with YL-38 Comparator Module

@ expert peshawar

FC-37 Rain Detection Sensor with YL-38 Comparator Module is used to detect water and it can detect beyond of what a humidity sensor do. The FC-37 rain sensor is set up by two pieces, the electronic board and the collector board that collects the water drops.

 120.00

In stock

FC-37 Rain Detection Sensor with YL-38 Comparator Module is used to detect water and it can detect beyond of what a humidity sensor do. The FC-37 rain sensor is set up by two pieces, the electronic board and the collector board that collects the water drops.

The control module of the raindrop sensor has 4 outputs. VCC is connected to a 5V supply. The GND pin of the module is connected to the ground. The D0 pin is connected to the digital pin of the microcontroller for digital output or the analog pin can be used.

FC-37 Rain Detection Sensor has a built-in potentiometer for sensitivity adjustment of the digital output (D0). It also has a power LED that lights up when the sensor is turned on and a digital output LED.

The analog output is used in detection of drops in the amount of rainfall. Connected to 5V power supply, the LED will turn on when induction board has no rain drop, and DO output is high. When dropping a little amount water, DO output is low, the switch indicator will turn on. Brush off the water droplets, and when restored to the initial state, outputs high level.

The FC-37 Rain Detection Sensor is an easy tool for rain detection. It can be used as a switch when raindrop falls through the raining board and also for measuring rainfall intensity. The module features, a rain board and the control board that is separate for more convenience, power indicator LED and an adjustable sensitivity though a
potentiometer.

You can place the wide area electrode conductor on the area where the water should be present.
When the module detects water, electricity conducts and therefore the sensor will output a trigger signal (LOW for has water and HIGH for no water).

Features: –

  • Comparator output signal clean wave good driving ability, than 15ma
  • Output: Digital switching output (0 and 1) and ao analog voltage output, with fixing bolt holes for easy installation
  • Power adjust sensitivity, using wide lm393 voltage comparator
  • Small board PCB dimensions: 3.2cm x 1.4cm, power indicator light, the output signal led indicating lamp, rated voltage and 3.3v-5v

FC-37 Rain Detection Sensor Specifications: –

  • Adopts high quality of RF-04 double sided material.
  • Area: 5cm x 4cm nickel plate on side,
  • Anti-oxidation, anti-conductivity, with long use time;
  • Comparator output signal clean waveform is good, driving ability, over 15mA;
  • Potentiometer adjust the sensitivity;
  • Working voltage 5V;
  • Output format: Digital switching output (0 and 1) and analog voltage output AO;
  • With bolt holes for easy installation;
  • Small board PCB size: 3.2cm x 1.4cm;
  • Uses a wide voltage LM393 comparator

FC-37 Rain Detection Sensor Applications: –

  • Automatic windshield wipers
  • Smart Agriculture
  • Home-Automation

Pin Description: –

S.No: Name Function
1 VCC Connects supply voltage- 5V
2 GND Connected to ground
3 D0 Digital pin to get digital output
4 A0 Analog pin  to get analog output
Datasheet: –

datasheet

Package: –

1 x FC-37 Rain Detection Sensor

Related Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “FC-37 Rain Detection Sensor with YL-38 Comparator Module”

Vendor Information

  • Store Name: expert.peshawar
  • Vendor: expert peshawar
  • Address: Market
    Peshawar
    Khyber Pakhtunkhwa
    25000
  • 5.00 5.00 rating from 2 reviews

You may also like…

FC-37 Rain Detection Sensor with YL-38 Comparator Module
FC-37 Rain Detection Sensor with YL-38 Comparator Module

 120.00

Majju PK
Logo
Reset Password
Shopping cart