KY-028 Digital NTC Thermistor Temperature Sensor

Sold by
sherjaan
@ sherjaan

The KY-028 is a Digital NTC Thermistor Temperature Sensor which is a small, easy-to-use module that can be used to measure temperatures in the range of -55°C to 125°C.

 140.00

In stock

SKU: R3C1-9 Category: Tag:

The KY-028 is a Digital NTC Thermistor Temperature Sensor which is a small, easy-to-use module that can be used to measure temperatures in the range of -55°C to 125°C. It has both digital and analog outputs, and a potentiometer to adjust the detection threshold on the digital interface.

The module consists of an NTC thermistor, an LM393 dual differential comparator, a 3296W trimmer potentiometer, 6 resistors, 2 LEDs, and 4 male header pins. The NTC thermistor is a type of resistor whose resistance decreases with increasing temperature. The LM393 comparator compares the resistance of the thermistor to a reference voltage, and outputs a digital signal if the temperature exceeds a certain threshold. The potentiometer is used to adjust the threshold temperature.

The KY-028 module is compatible with a wide range of microcontrollers, including Arduino, Raspberry Pi, and ESP32. It can be used in a variety of applications, such as temperature monitoring, thermostat control, and home automation.

The KY-028 Digital Thermistor Temperature Sensor Module can operate with an input voltage of 3.3V to 5.5V. This means that it can be powered by a wide range of sources, including a USB port, a battery, or a regulated power supply.

The 4PIN Thermistor Temperature Sensor Module is compatible with a wide range of microcontrollers, including Arduino, Raspberry Pi, and ESP32. 

KY-028 Temperature Sensor Module has both digital and analog outputs. The digital output is a logic level signal that is either HIGH or LOW, depending on whether the temperature is above or below the threshold. The analog output is a voltage signal that is proportional to the temperature.

If you are looking for a simple, easy-to-use temperature sensor module, the 4PIN Thermistor Temperature Sensor Module is a great option. 

Features : –

The NTC thermistor in the KY-028 module is connected to an LM393 comparator. The LM393 comparator compares the resistance of the thermistor to a reference voltage. If the resistance of the thermistor is lower than the reference voltage, the LM393 comparator outputs a digital signal. The digital signal can use to control other devices, such as LEDs or buzzers.

The KY-028 Temperature Sensor Module has a number of benefits, including:

  • Easy to use: The module is easy to set up and use. It can connect to a wide range of microcontrollers, including Arduino, Raspberry Pi, and ESP32.
  • Versatile: The module can be used in a variety of applications, such as temperature monitoring, thermostat control, and home automation.
  • Accurate: The module is relatively accurate, with a temperature measurement range of -55°C to 125°C.
  • Cost-effective: The module is relatively inexpensive, making it a good option for budget-minded projects.

Here are some of the specific benefits of the KY-028 Temperature Sensor Module:

  • Digital and analog outputs: The module has both digital and analog outputs, which makes it versatile for a variety of applications. The digital output can use to trigger alarms or other events, while the analog output can use to measure the temperature more precisely.
  • Potentiometer to adjust the threshold temperature: The potentiometer on the module can  use to adjust the threshold temperature. This allows you to customize the module to meet your specific needs.
  • Built-in voltage regulator: The module has a built-in voltage regulator, which makes it compatible with a wide range of input voltages. This means that you can power the module from a variety of sources, such as a USB port, a battery, or a regulated power supply.

KY-028 Digital NTC Thermistor Temperature Sensor Specifications : –

The KY-028 temperature sensor module also has a potentiometer that can use to adjust the detection threshold. The detection threshold is the temperature at which the LM393 comparator will output a digital signal. By adjusting the potentiometer, you can change the temperature at which the module will trigger.

The KY-028 Temperature Sensor Module is compatible with a wide range of microcontrollers, including Arduino, Raspberry Pi, and ESP32. It can use in a variety of applications, such as temperature monitoring, thermostat control, and home automation. The KY-028 Temperature Sensor Module has the following specifications:

  • Temperature measurement range: -55°C to 125°C
  • Input voltage: 3.3V to 5.5V
  • Digital output: Logic level signal that is either HIGH or LOW, depending on whether the temperature is above or below the threshold
  • Analog output: Voltage signal that is proportional to the temperature
  • Potentiometer to adjust the threshold temperature: The potentiometer on the module can be used to adjust the threshold temperature. This allows you to customize the module to meet your specific needs.
  • Built-in voltage regulator: The module has a built-in voltage regulator, which makes it compatible with a wide range of input voltages. This means that you can power the module from a variety of sources, such as a USB port, a battery, or a regulated power supply.
  • Dimensions: 15mm x 36mm [0.6in x 1.4in]
  • Weight: 3g

KY-028 Digital NTC Thermistor Temperature Sensor Pin Descriptions : –

The KY-028 Digital Thermistor Temperature Sensor Module has both digital and analog outputs. The digital output is a logic level signal that is either HIGH or LOW, depending on whether the temperature is above or below the threshold. The analog output is a voltage signal that is proportional to the temperature.

The digital output is useful for applications where you need to know whether the temperature is above or below a certain threshold. The NTC Temperature Sensor Module has 4 pins, each with a specific function.

  • VCC: This pin provides the power supply for the module. The voltage range is 3.3V to 5.5V.
  • GND: This pin is the ground pin for the module.
  • DO: This pin is the digital output pin for the module. The output is either HIGH or LOW, depending on whether the temperature is above or below the threshold.
  • AO: This pin is the analog output pin for the module. The output is a voltage signal that is proportional to the temperature.
KY-028 Digital NTC Thermistor Temperature Sensor Applications : –

The NTC Temperature Sensor Module is a versatile and easy-to-use module that can use in a variety of applications. It is compatible with a wide range of microcontrollers, making it a great choice for a variety of projects. The NTC Temperature Sensor Module can use in a variety of applications, including:

  • Home automation
  • Industrial control
  • Scientific research
  • Weather monitoring
  • Medical devices
  • HVAC systems
  • Food safety
  • And more
Package : –

1 x KY-028 Digital NTC Thermistor Temperature Sensor

More Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “KY-028 Digital NTC Thermistor Temperature Sensor”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 6 reviews
KY-028 Digital NTC Thermistor Temperature Sensor
KY-028 Digital NTC Thermistor Temperature Sensor

 140.00

Majju PK
Logo
Reset Password
Shopping cart