Ublox Neo-6m GPS Module with Antenna in Pakistan

Sold by
sherjaan
@ sherjaan

Ublox Neo-6m GPS Module is a well-performing complete GPS receiver with a built-in 25 x 25 x 4mm ceramic antenna, which provides a strong satellite search capability. With the power and signal indicators, you can monitor the status of the module. Ublox Neo-6m GPS Module is a GPS (Global Positioning System) module and is used for navigation.

 1,400.00

In stock

SKU: R4C2-6 Category:

Ublox Neo-6m GPS Module is a well-performing complete GPS receiver with a built-in 25 x 25 x 4mm ceramic antenna, which provides a strong satellite search capability. With the power and signal indicators, you can monitor the status of the module. Ublox Neo-6m GPS Module is a GPS (Global Positioning System) module and is used for navigation.

The Ublox Neo-6m GPS Module simply checks its location on earth and provides output data which is longitude and latitude of its position. It is from a family of stand-alone GPS receivers featuring the high performance u-blox 6 positioning engine.

GPS does not need any kind of internet or wireless connection, but there are technologies like A-GPS that use the mobile network to shorten the time to first fix, or the initial positioning or increase the precision in situations when there is a low satellite visibility.

Ublox Neo-6m GPS Module global positioning system (GPS) module, a very popular, cost-effective, high-performance GPS module with a ceramic patch antenna, an on-board memory chip, and a backup battery that can be conveniently integrated with a broad range of microcontrollers. Nowadays, two NEO-6M GPS modules are extremely popular — the GY-GPS6MV2 and the GY-GPSV3-NEO.

The Ublox Neo-6m GPS Module engine on these modules is quite a good and it also has high sensitivity for indoor applications. Furthermore, there’s one MS621FE-compatible rechargeable battery for backup and EEPROM for storing configuration settings. The module works well with a DC input in the 3.3- to 5-V range (thanks to its built-in voltage regulator). The original circuit diagram of the module, borrowed from the web, is shown below:

Specifications: –

Receiver Type 50 channels, GPS L1(1575.42Mhz)
Horizontal Position Accuracy 2.5m
Navigation Update Rate 1HZ (5Hz maximum)
Capture Time Cool start: 27sHot start: 1s
Navigation Sensitivity -161dBm
Communication Protocol NMEA, UBX Binary, RTCM
Serial Baud Rate 4800-230400 (default 9600)
Operating Temperature -40°C ~ 85°C
Operating Voltage 2.7V ~ 3.6V
Operating Current 45mA
TXD/RXD Impedance 510Ω

 

Ublox Neo-6m GPS Module Antenna

An antenna is required to use the NEO-6M module for any kind of communication. So, NEO-6M the module comes with a patch antenna having -161 dBm sensitivity.

NEO-6M-Patch-Antenna

Ublox Neo-6m GPS Module Pinout

The NEO-6M GPS module has total 4 pins that interface it to the outside world. The connections are as follows:

Ublox-NEO-6M-GPS-Module-Pinout

 

GND is the Ground Pin and needs to be connected to GND pin on the Arduino.

TxD (Transmitter) pin is used for serial communication.

RxD (Receiver) pin is used for serial communication.

VCC supplies power for the module. You can directly connect it to the 5V pin on the Arduino.

Related Products at majju.pk
Datasheet:-

u-blox.com/…/NEO-6_DataSheet_(GPS.G6-HW-09005).pdf

Package: –

1 x  Gps Module

1 x external antenna

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Ublox Neo-6m GPS Module with Antenna in Pakistan”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 6 reviews
Ublox Neo-6m GPS Module with Antenna in Pakistan
Ublox Neo-6m GPS Module with Antenna in Pakistan

 1,400.00

Majju PK
Logo
Reset Password
Shopping cart