2 Relay Module 5v Dual Channel Relay Board with Optocoupler

Sold by
sherjaan
@ sherjaan

HW-383 2 Channel Relay module is frequently use in an automatic control circuit. 5V 2 Relay Module With Optocoupler can use to switch higher voltage and current loads than a microcontroller can normally do. This is a LOW Level 5v 2-channel relay interface board and each channel needs a 15-20ma driver current.

 210.00

In stock

SKU: R2C1-2 Category: Tags: , , , , ,

The 2 Relay Module 5v Dual Channel Relay Board with Optocoupler is a small electronic board that allows you to control two high current devices using a low current signal from a Microcontroller like the Arduino. The module has two relays, each of which can turn on or off by connecting the corresponding input pin to ground.

When the input pin is connected to ground, the relay coil is energized and the relay contacts close, connecting the output terminal to the common terminal. When the input pin is disconnected from ground, the relay coil is de-energized and the relay contacts open, disconnecting the output terminal from the common terminal.

The 5V 2 relay module is a versatile and easy to use device that can use for a variety of projects. Two relay module is also compatible with a wide range of microcontrollers, making it a great choice for a variety of projects.

This 5V Dual Channel Relay Module has 2 outputs. one is normally open and other normally closed (NO and NC). When the IN1 or in2 pin is connected to ground. NO will be open and NC will be closed and when IN1 or in2 is not connected to ground the opposite takes place. connecting a circuit or apparatus between one of these 2 pins, the common pin on the relay out-put, and a power source will let you to move up and down power to a circuit or apparatus.

The 2 Channel 5v Relay Module has 5 pins. Three of them are high voltage terminals ( Normally Close and Normally Open) that make connection to the apparatus you need to control.

This 5V 2 Relay Module With Optocoupler can use to control different appliances and necessary things with large current i.e 220VAC. 2 channel relay module equipped with high-current relays that work under AC250V 10a or DC30V 10a. It has a standard interface that can control directly by microcontroller.

Features: –

HW-383 Two Channel Relay module is frequently use in an automatic control circuit. To put it simply, it is an automatic switch to control a high-current circuit with a low-current signal.

5V two Relay Module With Optocoupler can use to switch higher voltage and current loads than a microcontroller can normally do. This is a LOW Level 5v 2-channel relay interface board and each channel needs a 15-20ma driver current.

Here are some of the features of a 5V 2 relay module:

  • Two relays
  • 5V logic compatible
  • Active low input
  • Flyback diodes
  • LEDs for relay status indication
  • Small and compact size
  • Good for safe control of higher amperage circuits
  • Brand new and high quality.
  • Standard interface that can control directly by Microcontroller like Arduino 8051, Avr, pic, DSP, ARM)]
  • current, which can get stretched to 250v, 10a or 125v, 15a

2 Relay Module 5v Dual Channel Relay Board Specifications: –

If you are looking for a way to control high-current devices using a low-current signal, a 5V 2 Relay Module With Optocoupler is a great option. The module is versatile, easy to use, and compatible with a wide range of microcontrollers.

Here are some of the Specifications of 2 Relay Module 5v Dual Channel Relay Board with Optocoupler

  • Relay Maximum output: DC 30V/10A, AC 250V/10A
  • 2 Channel Relay Module with Optocoupler LOW Level Triger expansion board, which is compatible with Arduino
  • Relay of high quality loose music relays SPDT. A common terminal, a normally open, one normally closed terminal
  • optocoupler isolation, good anti-jamming
  • 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
  • Equipped with high-current relay, AC250V 10A ; DC30V 10A
  • Indication LED’s for Relay output status

2 Relay Module 5v Dual Channel Relay Board Applications: –

The 2 Relay Module 5v Dual Channel Relay Board with Optocoupler is a versatile and easy to use device that can use for a variety of projects. For example, you could use it to control a motor, a light bulb, or a solenoid valve. The module is also compatible with a wide range of microcontrollers, making it a great choice for a variety of projects.

Here are some of the Applications of a 5V Dual Channel Relay Module:

  • Simplified electric apparatus main loads
  • Home automation
  • Battery backup
  • High electric current load Switching
2 Relay Module 5v Dual Channel Relay Board Datasheet: –

handsontec.com/dataspecs/2Ch-relay.pdf

Package: –

1 x 2 Relay Module 5v Dual Channel Relay Board with Optocoupler

Related Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “2 Relay Module 5v Dual Channel Relay Board with Optocoupler”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 6 reviews
2 Relay Module 5v Dual Channel Relay Board with Optocoupler
2 Relay Module 5v Dual Channel Relay Board with Optocoupler

 210.00

Majju PK
Logo
Reset Password
Shopping cart