LM393 Rain Sensor Module / Water Drop Detection Sensor

Sold by
sherjaan
@ sherjaan

The LM393 rain sensor module is a simple and easy-to-use device that can use to detect rain. This Rain/water drop detection sensor consists of a printed circuit board (PCB) with a sensing pad and a comparator IC.

 150.00

In stock

The LM393 rain sensor module is a simple and easy-to-use device that can use to detect rain. This Rain/water drop detection sensor consists of a printed circuit board (PCB) with a sensing pad and a comparator IC. The sensing pad is made of a conductive material, such as nickel, and when it is wet, the resistance of the pad decreases. This change in resistance is detected by the comparator IC, which outputs a digital signal.

The LM393 rain sensor module can power with +5V or +3.3V. The input voltage of the sensor is determined by the power supply voltage that you choose. If you are using a 5V power supply, the input voltage of the sensor will be 5V. If you are using a 3.3V power supply, the input voltage of the sensor will be 3.3V.

The LM393 rain sensor module works on the principle of resistance change. The sensor has a sensing pad that is made of a conductive material, such as nickel. When the sensing pad is dry, the resistance of the pad is high. When the sensing pad is wet, the resistance of the pad decreases.

The sensor also has a LM393 comparator IC. The comparator IC compares the voltage on the sensing pad to a reference voltage. When the voltage on the sensing pad is lower than the reference voltage, the comparator IC outputs a high signal. When the voltage on the sensing pad is higher than the reference voltage, the comparator IC outputs a low signal.

Features : –

The LM393 water drop sensor is a simple and easy-to-use device that can use to detect the presence of water droplets. It is a type of conductive sensor that works by using a conductive material that changes its resistance when it is wet. When a water droplet touches the conductive material, the resistance decreases, which triggers the sensor.

The LM393 water drop sensor is a simple and easy-to-use device that has many benefits. Some of the benefits of the LM393 water drop sensor include:

  • Low cost: The LM393 water drop sensor is a relatively inexpensive device, which makes it a good choice for budget-minded projects.
  • Easy to use: The LM393 water drop sensor is very easy to use, even for beginners. It can  connect to an Arduino or other microcontroller with just a few jumper wires.
  • Reliable: The LM393 water drop sensor is a reliable device that can be used in a variety of applications. It is not affected by humidity or temperature, so it can be used in a wide range of environments.
  • Wide range of applications: The LM393 water drop sensor can be used in a wide range of applications

LM393 Rain Sensor Module Specifications : –

The LM393 rain sensor module is a simple and easy-to-use device that can use to detect rain. It is a good choice for applications where you need to detect rain in a simple and reliable way. When it is raining, the sensing pad gets wet, which decreases the resistance of the pad. This causes the voltage on the sensing pad to decrease. When the voltage on the sensing pad decreases below the reference voltage, the comparator IC outputs a high signal. This high signal is then used to trigger an output device, such as an LED or a buzzer.

Here are some of the specifications of the LM393 water drop sensor:

  • Input voltage: The LM393 water drop sensor can power with +5V or +3.3V.
  • Output signal: The output signal from the sensor is a digital signal that is high when a water droplet is detected and low when it not detected.
  • Sensitivity: The sensitivity of the sensor can adjust by using a potentiometer.
  • Range: The range of the sensor is affected by the size of the sensing pad. A larger sensing pad will have a longer range than a smaller sensing pad.
  • Temperature range: The LM393 water drop sensor can use in a wide range of temperatures, from -40°C to 85°C.
  • Humidity range: The LM393 water drop sensor not affected by humidity, so it can use in humid environments.

LM393 Rain Sensor Module Pin Descriptions : –

The sensor also has a potentiometer, which can use to adjust the sensitivity of the sensor. When the potentiometer is turned clockwise, the sensor will become more sensitive. When the potentiometer is turned counterclockwise, the sensor will become less sensitive.

Here are the pin descriptions for the snow/raindrops detection sensor module:

  • VCC: The power supply pin, which should be connected to 5V.
  • GND: The ground pin.
  • OUT: The digital output pin, which will be high when it is raining or snowing and low when it is not.
  • S: The sensing pad, which is made of a conductive material. When the sensing pad get wet, the resistance of the pad decreases. This causes the voltage on the sensing pad to decrease. When the voltage on the sensing pad decreases below a certain threshold, the OUT pin will go high.
LM393 Rain Sensor Module Applications : –

The LM393 snow/raindrops detection sensor module is a relatively inexpensive and easy-to-use device that can use in a variety of applications. If you are looking for a way to detect rain or snow, this sensor is a good option to consider. The snow/raindrops detection sensor module is a versatile device that can  use in a variety of applications. Some of the most common applications include:

  • Automated irrigation: The LM393 snow/raindrops detection sensor can use to automate irrigation systems. When it starts raining, the sensor can trigger a valve to open, which will allow water to flow to the plants. This can help to ensure that the plants are watered properly, even if you are not home.
  • Weather forecasting: The sensor LM393 snow/raindrops detection can use to forecast rain. When it starts raining, the sensor can send a notification to the user, or it can automatically trigger a weather alert. This can help people to prepare for bad weather conditions.
  • Home automation: The LM393 snow/raindrops detection sensor can use to control home automation devices, such as lights and sprinklers. For example, when it starts raining, the sensor can trigger the lights to turn on or the sprinklers to turn off. This can help to save energy and water.
  • Industrial applications: The LM393 snow/raindrops detection sensor can use in a variety of industrial applications, such as monitoring the moisture content of materials or detecting leaks.

Here are some additional applications for the snow/raindrops detection sensor module:

  • Agriculture: The LM393 snow/raindrops detection sensor can use to monitor the moisture content of soil. This can help farmers to determine when to irrigate their crops.
  • Transportation: The LM393 snow/raindrops detection sensor can use to monitor the condition of roads and bridges. This can help to ensure that the roads are safe to drive on during wet weather conditions.
  • Safety: The LM393 snow/raindrops detection sensor can use to detect leaks in pipes or tanks. This can help to prevent flooding and other safety hazards.
Package : –

1 x LM393 Rain Sensor Module

More Products at majju.pk

 

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “LM393 Rain Sensor Module / Water Drop Detection Sensor”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 6 reviews

You may also like…

LM393 Rain Sensor Module / Water Drop Detection Sensor
LM393 Rain Sensor Module / Water Drop Detection Sensor

 150.00

Majju PK
Logo
Reset Password
Shopping cart