USB Logic Analyzer 24m 8ch Microcontroller Arm FPGA Debug Tool

Sold by
sherjaan
@ sherjaan

USB Logic Analyzer 24mhz/8-channel Debug Tool is an instrument, captures/displays multiple signals from a digital system/digital circuit. USB Logic Analyzer 24mhz/8-channel may convert the captured data into timing diagrams, protocol decodes, state machine traces, assembly language, or may correlate assembly with source-level software. USB Logic Analyzer 24mhz/8-channel have advanced triggering capabilities, and are useful when a user needs to see the timing relationships between many signals in a digital system.

 1,400.00

In stock

USB Logic Analyzer 24mhz/8-channel Debug Tool is an instrument, captures/displays multiple signals from a digital system/digital circuit. USB Logic Analyzer 24mhz/8-channel may convert the captured data into timing diagrams, protocol decodes, state machine traces, assembly language, or may correlate assembly with source-level software. 24mhz/8-channel Debug Tool have advanced triggering capabilities, and are useful when a user needs to see the timing relationships between many signals in a digital system.

This is a very affordable 24Mhz 8 Channel USB Logic analyzer. A logic analyzer is a must have tool for any serious electronics hobbyist. With a logic analyzer it is possible to see a visual representation of the zeros and ones that are flashing by between two components.

A logic analyzer is different from an oscilloscope because the analyzer allows you to capture the data on a PC for a more detailed analysis of the data which is being transmitted and received. This logic analyzer supports 10 different communications standards (see Specifications below). with 8 channels it will allow you to monitor upto 8 different wires. For example you can monitor the Serial port (tx/Rx pins), the I2C Interface, and the SPI Interface all at the same time.

These analyzers will work with both 3.3V and 5V systems (up to 5.25V max and 2.0V minimum on a high logic-level) and is powered via an included mini-B USB cable. This logic analyzer works with sigrok – an open-source, cross-platform signal analysis software suite.

The USB Logic Analyzer 24mhz/8-channel Debug Tool ships with Female-To-Female jumper wires. If you’re using an Uno or board with female headers we recommend picking up a handful of Male-To-Male jumpers to connect the analyzer to the female headers.

Brand new and high quality.

USB Logic Analyzer Specifications:-

  • 8-channels
  • Sampling rate up to 24MHz, configurable down to 20kHz
  • 5.25V maximum voltage input
    • 2.0V minimum logic-high
    • 0.8V maximum logic-low
  • Input impedance > 100kΩ, 5pF
  • USB power supply
  • Supports open-source sigrok logic analyzer software
  • Cross-platform support: Windows, Mac OS X, Linux, Android, etc.
  • Dimensions: 54.7 x 27.4 x 14.1 mm

Package Includes:

  • 24MHz/8-Channel USB Logic Analyzer
  • 10-conductor Female-to-Male Jumper Wires
  • Mini-B USB Cable

Related Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “USB Logic Analyzer 24m 8ch Microcontroller Arm FPGA Debug Tool”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 2 reviews
USB Logic Analyzer 24m 8ch Microcontroller Arm FPGA Debug Tool
USB Logic Analyzer 24m 8ch Microcontroller Arm FPGA Debug Tool

 1,400.00

Majju PK
Logo
Reset Password
Shopping cart