Robot Gear Motor Dual Shaft BO Gear Motor For Smart Car

Robot Gear Motor Dual Shaft BO Gear Motor For Smart Car, This gear motor is perfect for your next robotics project. This gear motor is ideal for robotic car or line-tracing robot. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inch long, 0.85 inch wide and 0.7 inch thick.

The wheel can be mounted on either side and the Gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48 you can get some really good torque at 5 Volts.

A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.

These are standard ‘130 size’ DC hobby Robot Gear Motor. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino where you are more likely to have 5 or 9V available than a high current 3V setting.

They’ll fit in most electronics that already have 130-size motors installed and there’s two breadboard-friendly wires soldered on already for fast prototyping

Specifications Of DC Gear Motor

• Voltage (Range): 3Volt to 6volt
• Current (Stall): 100mA
• Speed: 125RPM
• Torque: 0.8kg.cm
• Gearmotor Style: Hobby
• Gear Material: Plastic
• Gearbox Ratio: 48:1
• Encoder: No

Features: –

• Ability to operate with minimum or no lubrication, due to inherent lubricity.
• Elimination of machining operations.
• Corrosion-resistance; elimination of plating, or protective coatings.
• Low density: lightweight, low inertia.
• Consistency with the trend to greater use of plastic housings and other components.
• Capability to absorb shock and vibration as a result of elastic compliance.
• The relatively low coefficient of friction.
• Uniformity of parts.
• used with a 69mm Diameter Wheel for Plastic Gear Motors.

EXTRA SPECIFICATIONS

• Voltage: 3V – 6V
• RPM: 125r / minute
• Current: 80 – 100mA
• Reduction: 48:1
• Output Torque: 0.8kg.cm
• Brush-type: Brush

Package:-

1 x Robot Gear Motor Dual Shaft BO Gear Motor For Smart Car

Related Products at majju.pk

• Smart Robot Car Tyre Wheel Gear Motor Set DC 3-6V
• 4 Wheel Robot Chassis Smart Car Kits with Speed Encoder
• 3wd Robot Chassis Smart Robot Car Chassis kit
• 2WD ROUND ROBOT CAR CHASSIS