HC-06 Bluetooth Module

The HC-06 is a Bluetooth module designed for establishing short-range wireless data communication between two microcontrollers or systems. Bluetooth Module HC-06 works on the Bluetooth 2.0 communication protocol and can only act as a slave device.

The HC-06 module operates in the 2.4 GHz ISM frequency band. HC-06 Bluetooth module uses a technique called frequency hopping spread spectrum (FHSS) to avoid interference. FHSS is a technique where the module changes its frequency randomly over time. The ISM band is a frequency band that is unlicensed and available for use by the general public.

This Bluetooth Module HC-06 is a slave module meaning that it can receive serial data when serial data is sent out from a master Bluetooth device. The HC-06 Bluetooth module is a slave Bluetooth module designed for wireless serial communication.

The HC-06 Bluetooth module can power with a voltage of 3.6 to 6 volts. However, the logic voltage of the TX/RX pins is 3.3 volts. This means that if you connect the HC-06 module to a 5 volt microcontroller, you will need to use a logic level converter to protect the module from the higher voltage.

The HC-06 module has a built-in 3.3 volt regulator, so you can connect it to a 5 volt power supply without any problems. However, if you are connecting the module to a 3.3 volt microcontroller, you can connect the VCC pin directly to the microcontroller’s power supply.

The HC-06 module consumes very little power, making it ideal for battery-powered applications. HC-06 Bluetooth Module is compatible with many popular microcontrollers, such as the Arduino and Raspberry Pi. The HC-06 Bluetooth module works on a voltage of 3.3 volts. The logic level of the TX/RX pins is also 3.3 volts. This means that when the TX pin is high, it is sending a logic 1 signal, and when it is low, it is sending a logic 0 signal. The same is true for the RX pin.

Features : –

The Bluetooth HC-06 module has a maximum range of 7 to 10 meters in open space. The HC-06 Bluetooth module is compatible with many popular microcontrollers, such as the Arduino and Raspberry Pi.

The HC-06 module uses a serial interface to communicate with other devices. Slave HC-06 Bluetooth module uses a baud rate of 9600bps, which means that it can transmit data at a rate of 9600 bits per second. The Slave HC-06 Bluetooth module can configure using AT commands. AT commands are a set of commands that can use to control the module. It has a number of benefits, including:

• Low cost
• Easy to use
• Wide range of applications
• Long range
• Low power consumption
• Compatible with many microcontrollers

HC-06 Bluetooth Module Specifications : –

The HC-06 module is very affordable, making it a great option for budget-minded projects. Bluetooth Module HC-06 can use in a wide variety of applications, such as remote control, data logging, and home automation. It has a number of specifications, including:

HC-06 Bluetooth Module Pin Descriptions : –

The HC-06 Bluetooth module works on the Bluetooth 2.0 communication protocol. The HC-06 Bluetooth module operates in the 2.4 GHz ISM frequency band with maximum range from 7 to 10 meters in open space area.

The Bluetooth module HC-06 consumes about 30mA of power when un paired and 10mA when paired. The HC-06 module can transmit data at a rate of up to 9600bps & can configure using AT commands. AT commands are a set of commands that can use to control the module.

• VCC: Power supply (3.3V)
• GND: Ground
• TXD: Transmit data
• RXD: Receive data
• EN: Enable pin (active low)
• KEY: Pin to enter AT commands mode

HC-06 Bluetooth Module Applications : –

The HC-06 Bluetooth module is a popular and affordable module that can use to add wireless communication to your projects. HC-06 Module has a wide range of applications, including:

• Remote control
• Data logging
• Home automation
• IoT (Internet of Things)
• Educational projects

These are just a few of the many applications of the HC-06 Bluetooth module. With its low cost, easy-to-use interface, and wide range of applications, the HC-06 module is a great option for adding wireless communication to your projects.

Package : –

1 x HC-06 Bluetooth Module

More Products at majju.pk

• HC-05 Bluetooth Master Slave Transceiver Module
• NodeMCU AMICA CP2102 LUA V2
• NodeMCU ESP8266 V3 LUA CH340 WIFI Dev. Board