NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module
MODERN HALLROAD
The NRF24L01 2.4GHz PA+LNA SMA wireless transceiver module with antenna is a popular choice for a variety of applications, including remote control, sensor networks, and home automation. NRF24L01 Wireless Module has a maximum range of up to 1000 meters in open space with line-of-sight, and it is compatible with the Arduino and other microcontrollers.
₨ 600.00
The NRF24L01 2.4GHz PA+LNA SMA wireless transceiver module with antenna is a popular choice for a variety of applications, including remote control, sensor networks, and home automation. NRF24L01 Wireless Module has a maximum range of up to 1000 meters in open space with line-of-sight, and it is compatible with the Arduino and other microcontrollers.
The NRF24L01 Wireless Module features a built-in power amplifier (PA) and low-noise amplifier (LNA), which helps to improve the range and reception of the signal. NRF24L01 With Antenna also has a reverse polarized SMA connector for maximum RF range.
To use the NRF24L01 Wireless Transceiver Module, you will need to connect it to your microcontroller using the SPI interface. You can then configure the module using the Arduino library or other software.
The NRF24L01 2.4GHz PA+LNA SMA wireless transceiver module with antenna requires a voltage of 3-3.6V. The recommended voltage is 3.3V. The NRF24L01 module has a built-in voltage regulator that helps to stabilize the voltage supply. However, it is still important to use a power supply that is within the recommended voltage range.
The NRF24L01 Wireless Module has a maximum current draw of 115mA in transmit mode and 45mA in receive mode. The NRF24L01 module can achieve a range of up to 1000 meters. However, in more typical conditions, the range is likely to be much lower.
This means that you will need a power supply that can provide at least 115mA of current in transmit mode. The maximum range of the NRF24L01 module depends on a number of factors, including the environment, the power output, and the antenna used. In ideal conditions, with a high-gain antenna and a clear line of sight.
Features : –
The NRF24L01 Wireless Transceiver Module operates in the 2.4GHz frequency band, which is also used by many other wireless devices. The NRF24L01 with antenna is a 2.4GHz wireless transceiver module that can use for a variety of applications, such as remote control, sensor networks, and home automation. It has a number of features that make it a versatile and powerful module:
- 2.4GHz frequency band
- Full-duplex communication
- SPI interface
- Low power consumption
- Data rates of 250kbps, 1Mbps, and 2Mbps
- 125 channels
- Enhanced ShockBurst protocol
NRF24L01 2.4GHz PA+LNA Specifications : –
The NRF24L01 2.4 GHZ Wireless Transceiver Module uses the SPI interface and the NRF24L01 Module can transmit and receive data at high power levels. which is a common interface used by many microcontrollers. This makes it easy to connect the NRF24L01 to a microcontroller. Here are the specifications of the NRF24L01+ wireless transceiver module:
- Frequency band: 2.4GHz
- Data rates: 250kbps, 1Mbps, and 2Mbps
- Range: Up to 1000 meters in open space
- Power consumption: 10mA in transmit mode, 5mA in receive mode
- Interface: SPI
- Channels: 125
- Protocol: Enhanced ShockBurst
- Security: 128-bit encryption
NRF24L01 2.4GHz PA+LNA Applications : –
The NRF24L01+ Module is a versatile and powerful wireless transceiver delicate device module. NRF24L01+PA+LNA Wireless Module With Antenna has a maximum range of up to 1000 meters in line of sight conditions.
This NRF24L01+PA+LNA Wireless Module With Antenna is a good choice for applications where you need a low-cost, easy-to-use, and reliable wireless communication solution. The NRF24L01 wireless transceiver module can use for a variety of applications, including:
- Remote control
- Sensor networks
- Home automation
- IoT (Internet of Things)
- Industrial automation
- Medical devices
Datasheet: –
sparkfun.com/…/nRF24L01Pluss_Preliminary_Product_Specification_v1_0.pdf
Package: –
- 1 x NRF24L01+PA+LNA Wireless Module
- 1 x SMA Antenna.
Related Products at majju.pk
- Arduino UNO R3 DIP Development Board Atmega328P
- ATmega328 Arduino Nano V3.0 In Pakistan With USB Cable
- Arduino Nano V3.0 ATmega328 in Pakistan
- ESP32 Nodemcu Esp32 Wifi Based Microcontroller Board
- Arduino Mega 2560 R3 with USB Cable (High Quality)
- Arduino Mega 2560 R3 with USB Cable Economical
User Reviews
Be the first to review “NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module”
You must be logged in to post a review.
Vendor Information
- Store Name: MODERN HALLROAD
- Vendor: MODERN HALLROAD
- Address:
- 5.00 rating from 1 review
Robobloq MP3 Module with RJ11 Connecting Wire in Pakistan
₨ 600.00
There are no reviews yet.