Ublox GPS Module NEO 6M in Pakistan

The Ublox GPS Module NEO 6M is a well-performing complete GPS receiver with a built-in 25 x 25 x 4mm ceramic antenna, which provides a strong satellite search capability. With the power and signal indicators, you can monitor the status of the module.

The Ublox GPS Module NEO 6M is a GPS (Global Positioning System) module and is used for navigation. The module simply checks its location on earth and provides output data which is longitude and latitude of its position. It is from a family of stand-alone GPS receivers featuring the high performance u-blox 6 positioning engine.

GPS does not need any kind of internet or wireless connection, but there are technologies like A-GPS that use the mobile network to shorten the time to first fix, or the initial positioning or increase the precision in situations when there is a low satellite visibility.

Ublox GPS Module NEO 6M global positioning system (GPS) module, a very popular, cost-effective, high-performance GPS module with a ceramic patch antenna, an on-board memory chip, and a backup battery that can be conveniently integrated with a broad range of microcontrollers. Nowadays, two NEO-6M GPS modules are extremely popular — the GY-GPS6MV2 and the GY-GPSV3-NEO.

The Ublox GPS Module NEO 6M engine on these modules is quite a good and it also has high sensitivity for indoor applications. Furthermore, there’s one MS621FE-compatible rechargeable battery for backup and EEPROM for storing configuration settings. The module works well with a DC input in the 3.3- to 5-V range (thanks to its built-in voltage regulator). The original circuit diagram of the module, borrowed from the web, is shown below:

Features: –

• ublox NEO 6M GPS module with antenna and build-in EEPROM
• This module is compatible with APM2 and APM2.5
• and EEPROM can save all your configuration data.
• The battery Model is MS621FE Need to welding
• Battery not included.
• Interface: RS232 TTL
• Power: 3-5V
• Baudrate default:9600bps

Ublox GPS Module NEO 6M Specifications:

Ublox NEO 6m GPS configuration

Start by connecting the patch antenna to the U.FL connector. Remember to thread the U.FL cable through one of the mounting holes for robust connection.

The module usually comes with header pins unsoldered. So, you’ll need to solder them.

Now, connect Tx and Rx pin on module to digital pin#2 and #3 respectively on Arduino; as we’ll be using software serial to talk to the module.

Next, connect VCC pin to the 5V pin on the arduino and GND to ground.

neo-6m gps module dimensions

Antenna – 25 x 25 x 7 GPS Board – 22 x 30 x 4

ublox neo-6m gps module datasheet

u-blox.com/…/NEO-6_DataSheet_(GPS.G6-HW-09005).pdf

neo-6m gps module pinout

ublox neo-6m gps module arduino

Package: –

1 x GPS Module NEO 6M

Related Products at majju.pk

• Arduino Nano v3.0 in Pakistan
• Improved Arduino Uno R3 Board Kit with USB cable
• Arduino Uno R3 with USB Cable in Pakistan