DC MOTOR SPEED AND DIRECTION CONTROLLER
MODERN HALLROAD
Input supply voltage: 6V-24VDC The maximum continuous output current: 3A Duty Cycle adjustable: 0%-100% Wire Length: 20cm/7.87″(appr.) Size: (L)X(W)X(H) 57X37X21mm/2.24″X1.46″X0.83″(appr.) Features Brand New and high quality. Enable to provide a continuous current of 3A to your DC…
₨ 1,200.00
Input supply voltage: 6V-24VDC
The maximum continuous output current: 3A
Duty Cycle adjustable: 0%-100%
Wire Length: 20cm/7.87″(appr.)
Size: (L)X(W)X(H) 57X37X21mm/2.24″X1.46″X0.83″(appr.)
Features
Brand New and high quality.
Enable to provide a continuous current of 3A to your DC motor or other DC load.
Control the forward or reverse direction and the stop of DC motor by button switch.
Press the red button, the motor reverses rotates; and release the button, the motor stops.
Press the green button, the motor clockwise rotates; and release the button, the motor stops.
Operating instruction:
Before you attempting to wire the controller, make sure power is off.
WARNING: Do not reverse postive and negative power loads.This will damage the controller.
1. Connect wires refer to the “wiring diagram”.
2. Turn on the power, and adjust the potentiometer.
3. The LED indicates the power up and the speed of motor.
4. Control the forward or reverse direction of DC motor by button switches.
User Reviews
Be the first to review “DC MOTOR SPEED AND DIRECTION CONTROLLER”
You must be logged in to post a review.
Vendor Information
- Store Name: MODERN HALLROAD
- Vendor: MODERN HALLROAD
- Address:
- 5.00 rating from 1 review
12 Pin Connector PCB Mount Right Angle, Bent Screw Terminal
Raspberry Pi ADC ADS1115 16-Bit ADC – 4 Channel With Programmable Gain Amplier
₨ 1,200.00
There are no reviews yet.