GY-80 Multi Sensor Board 3 Axis Gyro -3 Axis Accelerometer – 3 Axis Magnetometer – Barometer – Thermometer
Sold by
@ JK HALLROAD Ask ownerJK HALLROAD
This board combines 5 sensors into a single tiny package. Convenient to expirement with different sensors or used together as an inertial management unit. They are all accessible via I2C bus.
₨ 1,700.00
Description:
All sensors are accessible via I2C bus for basic operation so you will only need 4 wires to get started:
- GND – Ground
- Supply voltage. GY80 is 5v and 3.3v compatible. Use one of the following depending on your interface voltage:
- VCC – For +5v power. If using with boards such as an Arduino UNO, Leonardo, Micro, Mega.
- VCC_3.3v – For +3.3v power. If using with boards such as an Arduino Due.
- SCL – I2C Clock
- SDA – I2C Data
The quickest way to verify your board is connected properly is running the following I2C scanner program. This simple sketch will print the I2C address of all discovered devices to the serial monitor.
Vendor Information
- Store Name: JK HALLROAD
- Vendor: JK HALLROAD
-
Address:
HALL ROAD
LAHORE
Punjab
54000 - No ratings found yet!
0
Related Products
₨ 1,500.00
HC-12 Wireless Serial Port Communication Module 433MHZ HC12 SI4463
Out of Stock
Sold by MODERN HALLROAD
0
0
GY-80 Multi Sensor Board 3 Axis Gyro -3 Axis Accelerometer – 3 Axis Magnetometer – Barometer – Thermometer
₨ 1,700.00
