GPS Module Receiver Navigation Satellite Positioning Neo-6m

GPS Module Receiver Navigation Satellite Positioning Neo-6m, a very popular, cost-effective, high-performance GPS module with a ceramic patch antenna, an on-board memory chip, and a backup battery that can be conveniently integrated with a broad range of microcontrollers.

The GPS Module Receiver Navigation Satellite Positioning Neo-6m engine on these modules is quite a good one, and it also has high sensitivity for indoor applications. Furthermore, there’s one MS621FE-compatible rechargeable battery for backup and EEPROM for storing configuration settings. The module works well with a DC input in the 3.3- to 5-V range.

The Global Positioning System (GPS) is a satellite-based navigation system made up of at least 24 satellites. GPS works in any weather conditions, anywhere in the world, 24 hours a day, with no subscription fees or setup charges.

The GPS Module Receiver Navigation Satellite Positioning Neo-6m is a well-performing complete GPS receiver with a built-in 25 x 25 x 4mm ceramic antenna, which provides a strong satellite search capability.

With the power and signal indicators, you can monitor the status of the module. Thanks to the data backup battery, the module can save the data when the main power is shut down accidentally.

GPS Module Receiver Navigation Satellite Positioning Neo-6m has 3mm mounting holes can ensure easy assembly on your aircraft, which thus can fly steadily at a fixed position, return to Home automatically, and automatic waypoint flying, etc. 

The NEO-6M is a very capable GPS for the price and size. Compatible with UART capable devices including Arduino, Raspberry Pi, MSP430, and MSP432.

Power the module and it will automatically acquire satellite signals and a position fix. Once it has a position fix the module will blink the on board LED. This LED will continue to blink while the module has a position fix.

Features : –

• Standalone GPS receiver
• 9600 baud (default setting; can be changed)
• 3.3V Device
• 3.3V TTL IOs; (FYI, the TX 3.3V ‘high’ state will be sufficient to drive normal 5V microcontroller TTL inputs without additional hardware)
• Onboard LED which flashes to indicate lock
• U-blox NEO-6M GPS module
• Under 1 second time-to-first-fix for hot and aided starts
• Indoor GPS: -162 dBm tracking sensitivity
• Anti-jamming technology
• Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
• U-blox 6 50 channel positioning engine with over 2 million effective correlators
• Timepulse
• 5Hz position update rate
• Operating temperature range: -40 TO 85°C
• UART TTL socket
• EEprom to store settings
• Dimensions: 35mm L x 26mm W x 12mm D (antenna dimensions of 25mm x 25mm x 10mm) 
• Uses a XC6204B2K voltage regulator, so it can take 3.3V and 5V operating voltages.

GPS Module Receiver Navigation Satellite Positioning Neo-6m Specifications: –

GPS Module Receiver Navigation Position FIX LED Indicator : –

There is an LED on the NEO-6M GPS Module which indicates the status of Position Fix. It’ll blink at various rates depending on what state it’s in

• No Blinking means It is searching for satellites
• Blink every 1s means Position Fix is found

GPS Module Receiver Navigation Battery & EEPROM: –

• The module is equipped with an HK24C32 two wire serial EEPROM. It is 4KB in size and connected to the NEO-6M chip via I2C.
• The module also contains a rechargeable button battery which acts as a super-capacitor.
• An EEPROM together with battery helps retain the battery backed RAM (BBR). The BBR contains clock data, latest position data(GNSS orbit data) and module configuration. But it’s not meant for permanent data storage.
• As the battery retains clock and last position, time to first fix (TTFF) significantly reduces to 1s. This allows much faster position locks.
• Without the battery the GPS always cold-start so the initial GPS lock takes more time.
• The battery is automatically charged when power is applied and maintains data for up to two weeks without power.

Datasheet: –

u-blox.com/…/NEO-6_DataSheet_(GPS.G6-HW-09005).pdf

Package: –

1 x GPS Module Receiver Navigation Satellite Positioning Neo-6m

Related Products at majju.pk

• GY521 MPU6050 MODULE 3 AXIS GYROSCOPE ACCELEROMETER
• SOP SSOP 20 SMD Adapter Board 0.65mm/1.27mm 20 Pins Pitch IC
• PAM8403 Volume Control Mini 2 Channel 5v Audio Amplifier Circuit
• DS3231 Real Time Clock Module RTC Clock Module
• Wemos D1 mini pro external antenna WI-FI Antenna
• Tiny RTC DS1307 RTC Module for Arduino
• STM8S003F3P6 STM8 Minimum Development Board In Pakistan
• ADXL335 GY-61 Accelerometer Module Triple Axis
• WEMOS D1 Mini Pro With External Antenna Connector