BMP180 Barometric Pressure Sensor Module for Arduino
BMP180 Barometric Pressure Sensor Module is compatible measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications.
₨ 250.00
BMP180 Barometric Pressure Sensor Module is compatible measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications.
By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve an accuracy of 1m, with the noise of only 17cm in ultra-high-resolution noise.
The BMP180 Barometric Pressure Sensor Module is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smart phones, tablet PCs and sports devices.
It follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces. The ultra-low power consumption down to 3 µA makes the BMP180 Barometric Pressure Sensor Module the leader in power saving for your mobile devices. BMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.
The BMP180 Barometric Pressure Sensor Module will operate at the only 0.3uA meaning low current draw for battery-powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull-ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.
Features: –
- Digital two wire (I²C, TWI, “Wire”) interface
- Wide barometric pressure range
- Flexible supply voltage range (1.8V to 3.6V)
- Ultra-low power consumption
- Low noise measurements
- Factory-calibrated
- Includes temperature sensor
- Low-profile with a small footprint
BMP180 Barometric Pressure Sensor Module Specifications: –
- Operating voltage of BMP180: 1.3V – 3.6V
- Input voltage of BMP180MODULE: 3.3V to 5.5V
- Peak current : 1000uA
- Consumes 0.1uA standby
- Maximum voltage at SDA , SCL : VCC + 0.3V
- Operating temperature: -40ºC to +80ºC
Pin Configuration: –
Pin Name |
Description |
VCC |
Connected to +5V |
GND |
Connected to ground. |
SDA |
Serial Data pin (I2C interface) |
SCL |
Serial Clock pin (I2C interface) |
3.3V |
If +5V is not present. Can power module by connecting +3.3V to this pin. |
Applications: –
- Indoor navigation
- Sport devices
- Computer Peripherals
- GPS
- Weather forecast
- Vertical velocity Indication
- Hobby projects
Datasheet: –
ae-bst.resource.bosch.com/…/BST-BMP180-FL000.pdf
Package: –
1 x BMP180 Barometric Pressure Sensor Module
Related Products at majju.pk
User Reviews
Be the first to review “BMP180 Barometric Pressure Sensor Module for Arduino”
You must be logged in to post a review.
Vendor Information
- Store Name: sherjaan
- Vendor: sherjaan
- Address:
- 5.00 rating from 6 reviews
₨ 250.00
There are no reviews yet.