CA3130 CMOS Op-Amp IC 15MHz BiMOS Operational Amplifier
MODERN HALLROAD
CA3130 CMOS Op-Amp IC is op amps that combine the advantage of both CMOS and bipolar transistors. Gate-protected P-Channel MOSFET (PMOS) transistors are used in the input circuit to provide very-high-input impedance, very-low-input current, and exceptional speed performance.
₨ 180.00
CA3130 CMOS Op-Amp IC is op amps that combine the advantage of both CMOS and bipolar transistors.
Gate-protected P-Channel MOSFET (PMOS) transistors are used in the input circuit to provide very-high-input impedance, very-low-input current, and exceptional speed performance.
CA3130 CMOS Op-Amp IC Series circuits operate at supply voltages ranging from 5V to 16V, (2.5V to 8V).
They can be phase compensated with a single external capacitor, and have terminals for adjustment of offset voltage for applications requiring offset-null capability. Terminal provisions are also made to permit strobing of the output stage.
The CA3130A offers superior input characteristics over those of the CA3130.
CA3130 is a BiMOS operational amplifier IC with MOSFET Input and BiMOS devices have advantages of both bipolar and CMOS transistors.
Bipolar transistors can perform fast switching and perform well under high bandwidths. On the other hand, CMOS op-amps consume less current.
The CA3130 consists of PMOS transistors at the input and CMOS transistors at the output.
These transistors provide the advantages of high impedance, high speed, less current consumption, and high bandwidth. It has a multitude of applications.
What is an Operational Amplifier (Op-amp) An operational amplifier is an integrated circuit that can amplify weak electric signals.
An operational amplifier has two input pins and one output pin. Its basic role is to amplify and output the voltage difference between the two input pins.
Specifications: –
- Op-amp coupled with MOSFET at output
- Wide power supply Range
- Singe supply – 5V to 16V
- Dual supply – ±2.5V to ±8V
- Maximum Output Voltage: 13.3V
- Maximum source current: 22mA
- Input Terminal current: 1mA
- Maximum sink current: 20mA
- Supply current: 10mA
- Common Mode Rejection Ration (CMRR): 80dB
CA3130 CMOS Op-Amp IC Applications: –
- Frequency Generator/Distorter
- Mobile jammers
- Voltage follower circuits
- DAC circuits
- Peak Signal/Noise detectors
- Oscillator circuits
CA3130 CMOS Op-Amp IC Pin Configuration
Number | Pin Name | Description |
1,5 | Offset Null Pins | Optionally used to remove the offset voltage at the output pin to make it perfect 0V during off state. |
2 | Inverting Input (IN-) | The Inverting pin is also given a fixed voltage which is compared with the (IN+) |
3 | Non-Inverting Input (IN+) | The Non-Inverting Pin of the comparator is give a variable voltage to compare |
4 | Ground (VCC-) | This pin is connected to the ground of the system (Negative voltage can also be used) |
6 | Output | This is the output pin of the op-amp |
7 | VCC+ | Provide the operating voltage for the Op-Amp. For CA3130 it is upto +16V |
8 | Strobe | Allows you to turn off output stage |
Datasheet: –
renesas.com/…dst/ca3130-ca3130a-datasheet
Package: –
1 x CA3130 Operational Amplifier IC, 15MHz
Related Products at majju.pk
- LM741 UA741 Operational Amplifier Op-Amp IC DIP-8
- LM358 IC Low-Power Single Supply Dual Operational Amplifier
- LM324 Quad OP-AMP IC Low Power Operational Amplifier
- OP07, OPERATIONAL AMPLIFIER IC, 600kHz
- LM318, OPERATIONAL AMPLIFIER IC, 15MHz
- LM386 Audio Power Amplifier in Pakistan
- AD620AN Amplifier Chip IC
User Reviews
Be the first to review “CA3130 CMOS Op-Amp IC 15MHz BiMOS Operational Amplifier”
You must be logged in to post a review.
Vendor Information
- Store Name: MODERN HALLROAD
- Vendor: MODERN HALLROAD
- Address:
- 5.00 rating from 1 review
₨ 180.00
There are no reviews yet.