IoT NodeMCU ESP8266 Starter Kit in Pakistan

@ MODERN HALLROAD

IoT NodeMCU ESP8266 Starter Kit is a complete development package for playing around with IoT projects and developing Internet of things based products. Whether you plan to do a university project, have an idea of new IoT product in mind or just want to play with IoT, NodeMCU IoT starter Kit or NodeMCU IoT Kit.

 4,200.00

IoT NodeMCU ESP8266 Starter Kit is a complete development package for playing around with IoT projects and developing Internet of things based products. Whether you plan to do a university project, have an idea of new IoT product in mind or just want to play with IoT, NodeMCU IoT starter Kit or NodeMCU IoT Kit.

This IoT NodeMCU ESP8266 Starter Kit come with 6 essential Sensors including Temperature and Humidity sensor Module, LDR light sensor, gas Sensor, Motion sensor, Soil Moisture sensor, Ultrasonic sensor to build the most outstanding IoT Projects and Products ranging from a Smart Home Security and Control system to an accurate Weather station.

With 3 sets of Jumper wires and Breadboard for solder-less connections, beautiful packing and with the promise of Timely and Quick Service – so that you can get the best value for your Price.

Do you want to DIY some funny and practical “IOT” applications? Welcome to the world of ESP8266 NodeMCU. It’s an ESP8266 Wi-Fi module with Crow tail interface. We will use it to make some simple application of fun with various Crow tail modules.
A total of 24 modules are housed in this plastic box , of course what we can use with ESP8266 NodeMCU not just for these, you can try more combinations of modules or buy more other modules.

Features: –

  • Open-source
  • Interactive
  • Programmable
  • Low cost
  • Simple & Smart
  • WI-FI enabled
  • Arduino-like hardware IO
  • Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
  • Code like Arduino, but interactively in Lua script.
  • Nodejs style network API
  • Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
  • Greatly speed up your IOT application developing process.

IoT NodeMCU ESP8266 Starter Kit Specifications: –

The Development Kit based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your development in the fastest way combination with NodeMCU Firmware!

  • USB-TTL included, plug & play
  • 10 GPIO, every GPIO can be PWM, I2C, 1-wire

IoT NodeMCU ESP8266 Starter Kit Component List: –

  • NodeMCU Lua V3 ESP8266 with CH340 Wi-Fi Dev. Board x1
  • Micro USB cable x1
  • 1602a LCD Qapass 1602a LCD Display x1
  • TowerPro SG90 Servo Motor 180 Degree x1
  • DHT11 digital temperature and humidity sensor x1
  • 2 Channel Relay Module With Optocoupler x1
  • L298N Motor Driver Module Dual H Bridge x1
  • 10k OHM TRIMMER POTENTIOMETER RM065 CARBON FILM POTENTIOMETER x3
  • 5v Passive Buzzer KY-006 Passive Piezo-buzzer Module x1
  • KY-018 LDR light sensor module x3
  • VS1838 IR Receiver Module KY-022 Infrared Receiver Module x1
  • Infrared remote control x1
  • LED (6x white, 6X red, 6x Yellow, 6X green) x24
  • 12x12x7.5mm Tactile Push Button x5
  • Resistors (20X 470 ohm, 20x 10k, 20x 1Kohm, 5 x 1 M ohm) x65
  • 10cm Male To Male Jumper x10
  • 10 cm Male To Female Jumper Wire x10
  • 10cm Female To Female Jumper Wire x10
  • Solderless Breadboard 400 tie Points SB400 x 2
  • MQ2 Smoke Sensor Module Flammable Gas & Smoke Sensor x1
  • PIR Motion Sensor HC–SR501 x1
  • Soil Moisture Sensor Module / Soil Hygrometer x1
  • Ultrasonic Sensor Module HC-SR04 x1
  • Plastic box x1
Package: –

1 x IoT NodeMCU ESP8266 Starter Kit

Related Products at majju.pk

Vendor Information

  • Store Name: MODERN HALLROAD
  • Vendor: MODERN HALLROAD
  • Address:
  • No ratings found yet!
IoT NodeMCU ESP8266 Starter Kit in Pakistan
IoT NodeMCU ESP8266 Starter Kit in Pakistan

 4,200.00

Majju PK
Logo
Reset Password
Shopping cart