IoT Starter Kit Nodemcu Starter Kit

@ MODERN HALLROAD

IoT Starter Kit Nodemcu Starter Kit is a simple beginners guide to IOT and various Wi-Fi applications. It includes all the basic parts required to get you up and started with the IOT environment. A Nodemcu development board is included in the kit with various other sensor and interfaces required for quick prototyping.

 4,500.00

Category:

IoT Starter Kit Nodemcu Starter Kit is a simple beginners guide to IOT and various Wi-Fi applications. It includes all the basic parts required to get you up and started with the IOT environment. A Nodemcu development board is included in the kit with various other sensor and interfaces required for quick prototyping.

Do you want to DIY some funny and practical “IOT” applications? Welcome to the world of ESP8266 NodeMCU. It’s an ESP8266 WiFi module with Crow tail interface. We will use it to make some simple application of fun with various Crow tail modules.

If you want to learn how to build something cool and Internet-connected, all you need is this IoT Starter Kit Nodemcu Starter Kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, humidity, temperature, and more, then send it through MQTT broker and light up remote LEDs, make noise, and move a motor when a trigger is detected.

Mindstorms Engineering brings an exciting product named Internet of Things IoT Starter Kit Nodemcu Starter Kit for beginners, hobbyists and makers that includes one of the most-popular IoT Development board NodeMCU (ESP8266) which has Wi-Fi on chip. This kit will enable students to dive into the world of Internet of Things and develop beginner’s project, integrate with Cloud using Wi-Fi, design basic apps on blynk that can easily be interfaced to visualize data on the go.

ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. 

Features: –

  • Open-source
  • Interactive
  • Programmable
  • Low cost
  • Simple & Smart
  • WI-FI enabled
  • Arduino-like hardware IO
  • Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
  • Code like Arduino, but interactively in Lua script.
  • Nodejs style network API
  • Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
  • Greatly speed up your IOT application developing process.

IoT Starter Kit Nodemcu Starter Kit Specifications: –

The Development Kit based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your development in the fastest way combination with NodeMCU Firmware!

  • USB-TTL included, plug & play
  • 10 GPIO, every GPIO can be PWM, I2C, 1-wire
  • FCC CERTIFIED WI-FI module (Coming soon

IoT Starter Kit Nodemcu Starter Kit List

  • ESP8266 WI-FI Nodemcu board x1
  • Micro USB cable x1
  • I2C 1602 LCD Display Screen x1
  • SG90 Servo Motor x1
  • DHT11 Temp & Humidity Sensor module x1
  • 2 Relay module x1
  • Stepper motor driver L298N x1
  • Potentiometer (10 k variable resistor) x3
  • Buzzer x1
  • LDR Module 4 PIN x3
  • Infrared receiver (VS1838B) x1
  • Infrared remote control x1
  • LED (6x white, 6X red, 6x Yellow, 6X green) x24
  • Push Buttons with Caps x5
  • Resistors (20X 470 ohm, 20x 10k, 20x 1Kohm, 5 x 1 M ohm) x65
  • Jumper pins wire M to M x10
  • Jumperwire M to F x10
  • Jumper wire F to F x10
  • Bread board 400 tie points x 2
  • Plastic box x1
Package: –

1 x IoT Starter Kit Nodemcu Starter Kit

Related Products at majju.pk

Vendor Information

  • Store Name: MODERN HALLROAD
  • Vendor: MODERN HALLROAD
  • Address:
  • No ratings found yet!
IoT Starter Kit Nodemcu Starter Kit
IoT Starter Kit Nodemcu Starter Kit

 4,500.00

Majju PK
Logo
Reset Password
Shopping cart