STM32F103C8T6 Blue Pill STM32 Arm Cortex Dev Board

STM32F103C8T6 Blue Pill or STM32F103 is ARM-based STM32 Cortex-M3 Minimum System Development Board is devices use the Cortex-M3 core, with a maximum CPU speed of 72 MHz.

The portfolio covers from 16 Kbytes to 1 Mbyte of Flash with motor control peripherals, USB full-speed interface and CAN Microcontrollers/STM32 32-bit Arm Cortex MCUs/STM32 Mainstream MCUs/STM32F1 Series.

This is STM32F103C8T6 Blue Pill Minimum System Board STM32 ARM Core Module. This board is a low-cost Minimum System Development Board for ARM Microcontroller STM32F103C8T6.

Board is suitable for learners that want to learn STM32 microcontroller with ARM Cortex-M3 32-bit core.

The Blue Pill is a development board based on STMicroelectronics’ STM32F103C9T6 microcontroller that has an ARM Cortex-M3 core that runs at 72MHz max.

Software libraries are available that allow users to program the chip using the Arduino IDE.

STM32F103C8T6 Blue Pill board (aka Blue Pill STM32), with USB connector that can be used for USB device peripheral that is inbuilt in this controller.

The board has Reset button along with SWD connector for programming and debugging. It has all the required voltage regulation circuitry and all the pins connected out to the 2.54mm pitch header. It’s an ideal low cost version of STM32F1 based system to experiment with.

The STM32F103C8T6 Blue Pill is a 32-bit Arduino compatible development board that features the STM32F103C8T6, a member of the STM32 family of ARM Cortex-M3 core microcontrollers. 

This STM32F103C8T6 Blue Pill development board is pre-flashed with an Arduino bootloader, so you can download the sketch just like other Arduino board.

The STM32F103C8T6 STM32 Blue Pill can be programmed using either the Type-C USB connector (if bootloader is flashed), the STLink USB dongle, or an external USB to 3.3V TTL adapter.

A set of 2.5mm pitch male headers is included (soldering is required).

Features:-

• STM32F103C8 main chip.
• SMD 8M crystal (through the chip internal PLL up to 72M) ST official standard parameters.
• LM1117-3.3V regulator chip provides a maximum of 800mA current.
• All the way mini USB port, the system can be powered version, aside USB communication.
• The reset button. A standard JTAG download port, support JLink, STLink. BOOT select the port.
• IO expansion pin 20pin X 2. A power indicator.
• A functional indicator, used to validate the basic functions of the IO port.
• Reserved for serial download interface, easy and 5V development board, serial port to download program.

STM32F103C8T6 Blue Pill Specifications: –

• STM32F103C8 main chip.
• SMD 8M crystal (through the chip internal PLL up to 72M) ST official standard parameters.
• LM1117-3.3V regulator chip provides a maximum of 800mA current.
• All the way mini USB port, the system can be powered version, aside USB communication.
• The reset button. A standard JTAG download port, support JLink, STLink. BOOT select the port.
• IO expansion pin 20pin X 2. A power indicator.
• A functional indicator, used to validate the basic functions of the IO port.
• Reserved for serial download interface, easy and 5V development board, serial port to download program.

STM32F103C8T6 Blue Pill Technical Data : –

Applications: –

• Rapid prototyping
• CRC calculations
• Robotics
• Consumer products
• Drone controllers

Package: –

1 x STM32F103C8T6 Blue Pill STM32 Arm Cortex Dev Board

Related Products : –

• STM32F103C8T6 STM32F103 ARM Cortex- M3 Minimum System Development Board In Pakistan
• STM32F429ZI MCU DISCOVERY KIT
• STM32F407 ARM CORTEX-M4 DEVELOPMENT BOARD
• STM32f4 STM32f407 Discovery Kit Arm Cortex-M4 Development Board
• TM4C123GXL TM4C123G LaunchPad Evaluation Kit in
• XBEE ADAPTER XBEE EXPLORER USB ADAPTER MODULE FOR