2A Boost Converter Module MT3608 Step Up Boost Module 5v to 28v

2A Boost Converter Module MT3608 Step Up Boost Module is a small sized highly efficient and low cost module is built for converting or boosting the voltage as low as 2V to max 28V DC with the maximum output current of 2 ampere.

The output voltage can be adjusted with the variable resistor used in the module. This is a boost converter meaning that it will take lower voltage and convert it into higher voltage.

MT3608 Module DC DC Boost Converter features automatic shifting to pulse frequency modulation mode at light loads. It includes under-voltage lockout, current limiting, and thermal overload protection.

The 2A Boost Converter Module MT3608 is a constant frequency, 6-pin SOT23 current mode step-up converter intended for small, low power applications.

The mt3608 step up switches at 1.2MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and extends battery life.

The mt3608 2a is a step-up(Boost) converter module intended for small and low-power applications. The module has the capability to regulate the output voltage up to 28V and deliver an output current of a maximum of 2A.

The mt3608 boost Converter consists of MT3608 IC which comes in a 6-Pin SOT23-6 Package switches at 1.2Mhz which allows the use of tiny capacitors and inductors leading to a compact size power boost module.

Other components used in this dc dc boost converter mt3608 are two ceramic capacitors, one variable resistor, one resistor and one Schottky diode and a 22uH inductor which is an important part of all voltage booster circuits.

Features: –

• Integrated 80mΩ Power MOSFET
• 2V to 24V Input Voltage
• 1.2MHz Fixed Switching Frequency
• Internal 4A Switch Current Limit
• Adjustable Output Voltage
• Internal Compensation
• Up to 28V Output Voltage
• Automatic Pulse Frequency Modulation Mode at Light Loads
• up to 97% Efficiency
• Available in a 6-Pin SOT23-6 Package

2A Boost Converter Module MT3608 Specifications: –

• Over heat protection
• Small size
• Up to 2 Ampere output current
• Input voltage can be from 2V DC to 24V DC
• The module can deliver 93% output accuracy
• Output voltage is adjustable from 5V DC to 28V DC
• Soft start function
• Less quiescent current only 200uA max.
• Low cost
• Using MT3608 high efficiency chip

2A Boost Converter Module MT3608 Applications: –

• Battery-Powered Equipment
• Set-Top Boxed
• LCD Bais Supply
• DSL and Cable Modems and Routers
• Networking cards powered from PCI or PCI express slots

Datasheet: –

prom-electric.ru/media/MT3608.pdf

Package: –

1 x 2A Boost Converter Module MT3608 Step Up Boost Module 5v to 28v

Related Products at majju.pk

• RFID RC522 MFRC522 Reader RFID Reader Writer Module
• 4 Pin Digital NTC Thermistor Temperature Sensor Module KY-028
• TCS3200 (RGB + Clear) Color Sensor Module
• MAX9814 Module Electret Microphone Amplifier Board
• DHT22 Digital Temperature and Humidity Sensor Module
• ultrasonic module hc-sr04 distance sensor for arduino
• DS18B20 Temperature Sensor Probe DS18B20 Waterproof Temperature Sensor
• RFID RC522 MFRC522 I2C 13.56 MHZ Reader Module for Arduino
• DHT11 Module Temperature Humidity Sensor for Arduino
• Arduino UNO SMD Rev3 Atmega328 UNO R3 SMD Edition
• Arduino UNO R3 Atmega328p With USB Cable