MT3608 Step Up Boost Module 5V to 28V

@ TECH HALLROAD

The MT3608 Step Up Boost module works by using a switching regulator. The MT3608 2A DC-DC boost module can achieve an efficiency of up to 93%.

 120.00

In stock

SKU: R16C1-1 Category: Tags: ,

The MT3608 Module is a DC-DC step-up converter module that can boost an input voltage of 2V to 24V to an output voltage of 5V to 28V. The output current is up to 2A. MT3608 Boost Module is a small, efficient, and easy-to-use module that is commonly used for a variety of applications, such as powering LED lights, small motors, and other electronic devices.

The 2A MT3608 step-up boost module is a DC-DC converter that can use to increase the input voltage to a higher output voltage. MT3608 2A Boost Module is a small, efficient, and inexpensive module that is commonly use in DIY electronics projects.

The MT3608 module works by using a switching regulator. The MT3608 2A DC-DC boost module can achieve an efficiency of up to 93%. A switching regulator is a type of power converter that uses a transistor to switch the input voltage on and off very rapidly. This creates a high-frequency square wave output voltage. The output voltage is then filtered to produce a smooth DC output voltage.

The 2A MT3608 module uses a feedback loop to control the output voltage. The feedback loop compares the output voltage to a reference voltage and adjusts the duty cycle of the switching transistor to maintain the output voltage at the desired level.

The 5V TO 12V MT3608 module is typically use in conjunction with a load, such as an LED light or a small motor. The load is connected to the output of the MT36085 Module. The input voltage is connect to the input of the module MT3608.

To use the MT3608 module, you will need to set the trimpot to the desired output voltage. The MT3608 module is a versatile and easy-to-use component that can use in a variety of applications. 

Features : –

The MT3608 is a small and lightweight boost module that is easy to incorporate into a variety of projects. The MT3608 module can achieve an efficiency of up to 93%, which means that less power wasted as heat.

The 2A MT3608 is easy to use step up boost Module and does not require any special programming or configuration. The MT3608 step up module has overvoltage protection to prevent damage to the module and the load. Boost module MT3608 also has thermal shutdown protection to prevent the module from overheating. Here are some of the benefits of using the MT3608 module

  • High efficiency
  • Small size
  • Easy to use
  • Wide input voltage range
  • Overvoltage protection
  • Thermal shutdown

MT3608 Step Up Boost Module Specifications : –

MT3608 can output 5V & 12V. 2A MT3608 is a DC-DC step-up converter that can boost an input voltage of 2V to 24V to an output voltage of 5V to 28V. The output current is up to 2A. Here are some of the specifications of the MT3608 module:

  • Input voltage range: 2V to 24V
  • Output voltage range: 5V to 28V
  • Output current: up to 2A
  • Efficiency: up to 93%
  • Switching frequency: 1.2MHz
  • Size: 37.2mm x 17.2mm x 14.0mm
  • Weight: 4g
  • Protection: Overvoltage protection, thermal shutdown protection

MT3608 Step Up Boost Module Applications : –

The 2A Boost Converter Module MT3608 is a constant frequency, 6-pin SOT23 current mode step-up converter intended for small, low power applications. The MT3608 step up switches at 1.2MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and extends battery life.

The MT3608 2a is a step-up(Boost) converter module intended for small and low-power applications. 2A Boost Converter Module has the capability to regulate the output voltage up to 28V and deliver an output current of a maximum of 2A. Here are some of the applications of the MT3608 module:

  • Powering LED lights
  • Driving small motors
  • Charging batteries
  • Providing backup power
  • Regulating voltage
  • Signal conditioning
  • Data conversion
Package : –

1 x MT3608 Step Up Boost Module 5V to 28V

More Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “MT3608 Step Up Boost Module 5V to 28V”

Vendor Information

  • Store Name: TECH HALLROAD
  • Vendor: TECH HALLROAD
  • Address:
  • No ratings found yet!
MT3608 Step Up Boost Module 5V to 28V
MT3608 Step Up Boost Module 5V to 28V

 120.00

Majju PK
Logo
Reset Password
Shopping cart