Mist Nozzle 0.6mm High Pressure Water Spray Brass Nozzle

The Mist Nozzle 0.6mm High Pressure Water Spray Brass Nozzle is a precision device that facilitates the dispersion of liquid in spray form. It is based on the principle of atomization.

One of the most important components of a cooling system is the misting nozzle. All misting systems are comprised of a series of nozzles placed in a line. When attached to high-pressure pumps, water is forced through nozzles, forming droplets which evaporate into mist when they reach the outdoor air. This can reduce the temperatures by 35 to 40 degrees Fahrenheit.

Without nozzles, the functioning of misting systems would not be possible. Nozzles are the core element that creates the mist. Misting nozzles spray water in the form of tiny droplets, following which flash evaporation takes place to cool the area. 

The most commonly used type of nozzle is the brass misting nozzle, which is constructed entirely of brass and is known for being reliable and durable. These nozzles generally produce bigger droplets of about 7-10 microns, as compared to the other type. 

0.6mm Mist Blower Nozzle Can effectively regulate the humidification amount and the spray effect. Out of many advantages, it’s one application is the way of a preventive measure has been taken by different countries in the corona pandemic is ‘Disinfection Gate.’ Within Gates, nozzles are fitted inside the gate that will spray the disinfectant solution on people while they walk. Fogging sanitization can be used by nozzle system in different areas such as Dust suppression, pest and disease control, Odor neutralization.

Features: –

• Made of brass with stainless steel orifice,
• anti-rust and durable.
• Easily screw into any 10/ 24 UNC threaded mist nozzle opening.
• Self-sealing o-ring included with each nozzle, no tape or sealant requires.
• 0.024″ (0.6mm) orifice diameter, 3-70kg working pressure, 90-380ml/min flow rate.
• Widely apply for a garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, a small fountain, etc.

Mist Nozzle 0.6mm Specifications

• Material Stainless steel
• Nozzle’s Aperture: 0.6mm
• Nozzle’s Working pressure: up to 20 bar
• Nozzles Connection size: 6mm dia. for plug

Package Include:

• 1x Mist Spray Nozzle 0.6mm

Related Products at majju.pk

• TM4C123GXL TM4C123G LaunchPad Evaluation Kit
• Best Misting Pump Filter for Misting System
• Push Fit Stop End 6mm Tube Plug End Connector S265
• Thermistor NTC 10K 1% Epoxy Thermistor
• 25mm Brass PCB Spacer M3 Hex Female Female Threaded Brass Spacer M3 Female Screw PCB Standoff Spacers
• 0.6mm Orifice Dia 9mm Long Brass Mist Nozzle
• Brass Misting Nozzle 0.4mm Water Sprayer Fogging Nozzle
• 3/4 Inch 220V AC Brass Electric Solenoid Valve For Water Air
• Aluminium Thermostat Heating Element Plate 12V 70 C
• Aluminium Thermostat Heating Element Plate 12V 110 C