Gravity Analog pH Sensor / Meter Pro Kit For Arduino

Sold by
sherjaan
@ sherjaan

Gravity Analog pH Sensor V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity.  Gravity Analog pH sensor is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing.

 8,000.00

Out of stock

Gravity Analog pH Sensor V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity.  Gravity Analog pH Sensor is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing.

Build your own PH meter gadget or a water monitoring station for your water tanks. This and our other water sensor devices could make for the ultimate water control device. Use it for your aquaponics or fish tanks or other materials that need measurements.

Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring.

Gravity Analog pH Sensor has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, then plug the PH2.0 interface into the analog input port of any Arduino controller. If programmed , you will get the pH value easily.

This industrial pH electrode is made of sensitive glass membrane with low impedance. It can be used in a variety of PH measurements with fast response and excellent thermal stability.

Gravity Analog pH Sensor has good reproducibility, is difficult to hydrolysis, and can eliminate basic alkali error. In 0pH to 14pH range, the output voltage is linear. The reference system which consist of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance. The ring PTFE membrane is not easy to be clogged, so the electrode is suitable for long-term online detection.

Features: –

  • 3.3V~5.5V wide input voltage range
  • Hardware filtered output signal with low jitter
  • Gravity connector and BNC connector, plug-and-play, and no soldering required
  • Software library supports two-point calibration and automatically identifies standard buffer solution
  • Uniform size and connector, convenient for the design of mechanical structures
  • Industrial probe that supports 7 x 24 measurement
  • Upgraded transmitter that is more accurate and stable

Gravity Analog pH Sensor Specifications: –

  • pH probe:
  • Laboratory grade probe typ2e
  • 0~14 detection range
  • 5°C to 60°C temperature range
  • 7±0.5 zero point
  • <2min response time
  • <250MΩ internal resistance
  • >0.5 years (depending on the frequency of use) probe life
  • 100cm cable length
  • Signal conversion board (transmitter) V2
  • 3.3V~5.5V supply voltage range
  • 0~3V output voltage range
  • BNC probe connector
  • PH2.0-3P signal connector
  • ±0.1 @25°C measurement accuracy
  • 42mm x 32mm dimensions

Gravity Analog pH Sensor Applications: –

  • Water quality testing
  • Aquaculture
Gravity Analog pH Sensor Documents: –
Related Products at majju.pk

 

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 2 reviews
Gravity Analog pH Sensor / Meter Pro Kit For Arduino
Gravity Analog pH Sensor / Meter Pro Kit For Arduino

 8,000.00

Majju PK
Logo
Reset Password
Shopping cart