Water Level Sensor Depth Detection Module

@ MODERN HALLROAD

Water level Measurement Module has a series of ten exposed copper traces, five of which are power traces and five are sense traces. These traces are interlaced so that there is one sense trace between every two power traces.

 65.00

In stock

Water level Measurement Module has a series of ten exposed copper traces, five of which are power traces and five are sense traces. These traces are interlaced so that there is one sense trace between every two power traces.

Water level Measurement Module is designed for water detection, which can be widely used in sensing the rainfall, water level, even the liquate leakage. The brick is mainly comprised of three parts: An Electronic brick connector, a 1 MΩ resistor, and several lines of bare conducting wires.

Water Sensor Brick works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sense traces.

Water level Measurement Module traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog pins to detect the amount of water induced contact between the grounded and sensor traces.

Water Sensor Brick can judge the water level through with a series of exposed parallel wires stitch to measure the water droplet/water size. This High Sensitivity Water Sensor can easily change the water size to analog signal, and output analog value can directly be used in the program function, then to achieve the function of water level alarm.

Water level Measurement Module have low power consumption, and high sensitivity, which are the biggest characteristics of this module. The High Sensitivity Water Sensor can be compatible with Arduino UNO, Arduino mega2560,Arduino ADK etc.

Water Level Sensor Depth Detection Module is simple and small portable water level droplet identification, this Sensor ,detection sensor that have high cost performance.

Features: –

  • No moving parts.
  • Water resistant enclosure.
  • Rugged design for long term use.
  • Precise measurement.
  • Instantaneous results.
  • Output Voltage is proportional to liquid level.
  • Can Measure large changes in water level.
  • Low cost.
  • Not conductivity based.
  • Compact size, and easy to mount.
  • Very low power operation.
  • Works with many different type of fluids.
  • Wide supply voltage range.
  • Compatible with Arduino and most data loggers.

Water level Measurement Module  Specifications: –

  • Working voltage: 5V
  • Working Current: <20ma
  • Interface: Analog
  • Width of detection: 40mm×16mm
  • Working Temperature: 10°C~30°C
  • Weight: 3g
  • Size: 65mm×20mm×8mm
  • Arduino compatible interface
  • Low power consumption
  • High sensitivity
  • Output voltage signal: 0~4.2V

Water level Measurement Module  Pin Description: –

  • S (Signal) pin is an analog output that will be connected to one of the analog inputs on your Arduino.
  • + (VCC) pin supplies power for the sensor. It is recommended to power the sensor with between 3.3V – 5V. Please note that the analog output will vary depending on what voltage is provided for the sensor.
  • (GND) is a ground connection.
Applications: –
  • Rainfall detecting
  • Liquid leakage
  • Tank overflow detector
Datasheet: –

curtocircuito.com.br/…/nivel_de_agua_analogico.pdf

Package: –

1 x Water level Measurement Module

Related Products at majju.pk

 

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Water Level Sensor Depth Detection Module”

Vendor Information

  • Store Name: MODERN HALLROAD
  • Vendor: MODERN HALLROAD
  • Address:
  • No ratings found yet!
Water Level Sensor Depth Detection Module
Water Level Sensor Depth Detection Module

 65.00

Majju PK
Logo
Reset Password
Shopping cart