CP2102 USB 2.0 TO TTL UART Serial Converter Module

CP2102 USB 2.0 TO TTL UART Serial Converter Module is a small, easy-to-use device that allows you to connect your microcontroller to your computer via a USB port. The module uses the CP2102 USB-to-UART bridge controller chip, which provides a simple and reliable way to interface with your microcontroller.

CP2102 has a crystal oscillator, EEPROM, and asynchronous serial data bus (UART), supports full-featured modem signals, without any external USB device. The CP2102 with other USB-UART adapter circuit works similar to the PC through the driver’s USB port into a virtual COM port in order to achieve the purpose of expansion.

To use the CP2102 USB TO Serial TTL Converter module, simply connect the TXD and RXD pins to the corresponding pins on your microcontroller. You can then use the DTR, RTS, CTS, and GND pins to control the flow of data between your microcontroller and your computer.

USB TO Serial CP2102 TTL UART Converter module is compatible with Windows, Mac OS X, and Linux. It also supports a wide range of baud rates, from 300 bps to 1.5 Mbps.

The CP2102 USB 2.0 TO TTL UART Serial Converter Module is a versatile and easy-to-use device that can be used to connect a wide variety of microcontrollers to your computer. It is a valuable tool for any engineer or hobbyist who works with microcontrollers.

This module has a 500mA auto recovery fuse path, preventing to burn computer USB due to power failures. It can directly plug into the PC USB port and be supplied by this port and no need external power supply. It has an LED indicator to show power and transceiver stats. Also, this LED indicator shows the transceiver speed by speed flashing, so the higher the intensity means the lower the baud rate.

Features : –

Here are some of the benefits of using the CP2102 USB 2.0 TO TTL UART Serial Converter Module:

• Easy to use
• Compatible with a wide range of operating systems
• Supports a wide range of baud rates
• Affordable

CP2102 USB 2.0 TO TTL UART Serial Converter Module Specifications : –

If you are looking for a reliable and easy-to-use way to connect your microcontroller to your computer, the CP2102 USB 2.0 TO TTL UART Serial Converter Module is a great option.

• This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter.
• Designed to be used for USB to TTL
• Built-in USB to RS232 Transfer chip.
• USB specification 2.0 compliant with full-speed 12Mbps.
• Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & +5V.
• Event character support Line break transmission.
• USB suspend states supported via SUSPEND pins.
• Temperature Range: -40degree to +85degree.
• Supports Windows 98SE, 2000, XP, Vista, Window7,8,10 Mac OS 9, Mac OS X Linux 2.40.

CP2102 USB 2.0 TO TTL UART Serial Converter Module Pin Description : –

The module has a 6-pin connector that provides the following signals:

• TXD (Transmit Data)
• RXD (Receive Data)
• DTR (Data Terminal Ready)
• RTS (Request to Send)
• CTS (Clear to Send)
• GND (Ground)

Package : –

1 x CP2102 USB 2.0 TO TTL UART Serial Converter Module

More Products at majju.pk

• ISD1820 Sound Voice Recording Playback Module
• LCD I2C Module IIC/I2C Serial Interface Adapter I2C Interface Module
• Hall Effect Sensor Module 3144 in Pakistan
• KY-026 IR Fire Flame Detection Sensor Module for Arduino
• CH376s Disk Read-Write Module USB Flash Disk For Arduino
• Small Passive Buzzer Module KY-006 Speaker Module for Arduino
• 20A ACS712 CURRENT SENSOR MODULE
• LDR Module KY-018 3Pin LM393 Based Photosensitive Sensor Module
• USB To RS485 TTL Serial Converter Adapter FT232 Module
• XL6009 DC-DC Buck Boost Converter Module 3V-32V to 5V-35V 4A
• FTDI FT232 FT232RL Module USB to TTL Serial Converter Adapter