XL6009 Step up Module DC-DC Boost Converter Module 3V-32V to 5V-35V 4A

XL6009 Step up Module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 3-32V DC to an output voltage of 5-35V DC

XL6009 Buck Boost Converter is used to “step-up” an input voltage to some higher level, required by a load. This unique capability is achieved by storing energy in an inductor and releasing it to the load at a higher voltage.

Below 3.6V, the buck-boost converter input current increases beyond the load current, while the buck converter enters the 100% duty cycle dropout where the input current is limited to the load current and the output voltage tracks the input.

The XL6009 module is a DC to DC BUCK-BOOST converter module that operates at a switching frequency of 400kHz. In such high frequency, it provides smaller sized filter components compared with low frequency switching regulators. It is the upgraded version of the LM2577 based module.

This DC-DC switching boost converter is capable of driving a 4A load with excellent line and load regulation. The main switching component XL6009 IC is available in fixed output voltages of 3.3 V, 5V, 12V, and an adjustable output version.

It is an efficient switching regulator and the output efficiency is significantly higher in comparison with the popular boost regulators. At higher input voltages, the regulator operates at a switching frequency of 400kHz thus allowing the overall board size to be smaller and space-saving.

Specifications: –

• Module Properties: Non-isolated boost (BOOST)
• Rectification: Non-Synchronous Rectification
• Input Voltage Range: 3V ~ 32V
• Output Voltage range: 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A)
• Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
• Conversion efficiency: <94% (greater the pressure, the lower the efficiency)
• Switching frequency: 400KHz
• Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
• Load Regulation: ± 0.5%
• Voltage Regulation: ± 0.5%
• Operating Temperature: -40  ~ +85 
• Dimensions: 43mm * 21mm * 14mm (L * W * H)

XL6009 Step up Module Features: –

• Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
• Wide Output voltage 5V ~ 35V;
• Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
• High switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)

XL6009 Step up Module Applications

• DIY based power supply
• To serve the power requirements of Audio-based circuits
• High current applications with small space

Package: –

1 x XL6009 Step up Module DC-DC Boost Converter Module

Related Products at majju.pk

• RFID RC522 MFRC522 Reader RFID Reader Writer Module
• DHT11 Module Temperature Humidity Sensor for Arduino
• Arduino UNO SMD Rev3 Atmega328 UNO R3 SMD Edition
• LM393 Sound Sensor Module KY-038
• LCD I2C Module IIC/I2C Serial Interface Adapter I2C Interface Module
• Arduino Nano V3 Atmega328 Atmel Atmega328p CH340 Development Board
• 240X128 Graphic LCD Display Module Original JHD Graphic 240128 LCD Display
• 2A Boost Converter Module MT3608 Step Up Boost Module 5v to 28v
• MAX9814 Module Electret Microphone Amplifier Board
• KY-033 IR Line Tracking Sensor Module Line Following Sensor
• Temperature Controller Thermostat W1209 Module