XH-W3001 Digital Temperature Controller 12V 10A

The XH-W3001 is a digital temperature controller that is commonly used in electronic projects. It is a low-cost, easy-to-use controller that can be interfaced with a wide variety of microcontrollers. The XH-W3001 has a 4-pin interface that consists of a power pin, a ground pin, a temperature sensor pin, and a load pin. The temperature sensor pin is used to connect the sensor to the controller. The load pin is used to connect the load to the controller.

XH-W3001 can measure temperature in a range of -50°C to 110°C with an accuracy of ±0.1°C. The controller can also be configured to work in either an on/off mode or a proportional mode. In on/off mode, the controller turns the load on when the temperature reaches the setpoint and turns the load off when the temperature drops below the setpoint. In proportional mode, the controller turns the load on to a certain percentage when the temperature reaches the setpoint and turns the load off to a certain percentage when the temperature drops below the setpoint.

The XH-W3001 is a versatile and easy-to-use controller that can use in a wide variety of electronic projects. It is a low-cost, accurate, and reliable controller that is a great choice for many applications.

The VCC pin is the power pin and should connect to a 110V or 220V AC power supply. The GND pin is the ground pin and should connect to the ground of the circuit. The Temperature Sensor pin is the pin that the temperature sensor connected to. The Load pin is the pin that the load connected to.

XH-W3001 temperature controller can operate on a voltage range of 110V to 220V AC. The typical operating voltage is 220V AC. The controller has a low power consumption of 10W.

Note : –

It is important to note that the XH-W3001 controller is not designed to be powered by a DC power supply. If you are using the controller with a microcontroller that is powered by DC, you will need to use a step-up converter to convert the DC voltage to AC voltage.

XH-W3001 Digital Temperature Controller Features : –

The XH-W3001 temperature controller has a temperature range of -50°C to 110°C with an accuracy of ±0.1°C. This means that the controller can measure temperature within a range of 50 degrees below freezing to 110 degrees Celsius, and the readings will be accurate to within 0.1 degrees Celsius.

The controller can also configure to work in either an on/off mode or a proportional mode. In on/off mode, the controller turns the load on when the temperature reaches the setpoint and turns the load off when the temperature drops below the setpoint. In proportional mode, the controller turns the load on to a certain percentage when the temperature reaches the setpoint and turns the load off to a certain percentage when the temperature drops below the setpoint.

Here are some of the key features of the XH-W3001 temperature controller:

• Digital signal output
• Wide temperature range
• High accuracy
• Low power consumption
• Easy to interface with microcontrollers
• On/off mode or proportional mode

XH-W3001 Digital Temperature Controller Specifications : –

The XH-W3001 is a very popular sensor for a variety of applications, including home automation, weather monitoring, environmental monitoring, industrial control, and medical devices. It is a low-cost, accurate, and reliable sensor that is easy to interface with microcontrollers. here are the specifications of the XH-W3001 temperature controller:

• Operating voltage: 110V to 220V AC
• Operating current: 10W
• Input signal: Digital signal via 1-wire bus
• Sensing element: NTC thermistor
• Operating range: Temperature: -50~110Celsius
• Accuracy: Temperature <+-0.1Celsius
• Response time: 2 seconds
• Dimensions: 15.3mm (0.6″) length x 7.8mm (0.3″) width x 25.3mm (1.0″) height
• Weight: 2.4g (0.08oz)

XH-W3001 Digital Temperature Controller Applications : –

The XH-W3001 is a versatile and easy-to-use controller that can use in a wide variety of electronic projects. It is a low-cost, accurate, and reliable controller that is a great choice for many applications. Here are some of the applications of the XH-W3001 temperature controller:

• Home automation
• Industrial control
• Medical devices
• Heating and cooling
• Temperature monitoring

XH-W3001 Digital Temperature Controller Pin Descriptions : –

The VCC pin should connect to a 110V or 220V AC power supply. The GND pin should connect to the ground of the circuit. The Temperature Sensor pin should connect to the temperature sensor. The Load pin should connect to the load.

The load can be anything that you want to control with the temperature controller. For example, you could connect a heating element, a cooling element, or a fan to the load pin. here is the pin description of the XH-W3001 temperature controller:

• Pin1: VCC (Power)
• Pin2: GND (Ground)
• Pin3: Temperature Sensor
• Pin4: Load

Package : –

1 x XH-W3001 Digital Temperature Controller

More Products at majju.pk

• 10K Ohm NTC Thermistor MF52-103 Temperature Sensor
• DHT11 Temperature Humidity Sensor Module for Arduino
• Waterproof DS18B20 Digital Temperature Sensor For Arduino