Dallas DS18B20 One Wire Temperature Sensor with Thermal Probe

@ JK HALLROAD

Dallas DS18B20 One Wire Temperature Sensor with Thermal Probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit temperature readings over a 1-Wire interface, so that only one wire needs to be connected from a central microprocessor.

 220.00

In stock

Dallas DS18B20 One Wire Temperature Sensor with Thermal Probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit temperature readings over a 1-Wire interface, so that only one wire needs to be connected from a central microprocessor.

Dallas DS18B20 One Wire Temperature Sensor is a pre-wired and waterproofed (with heat shrink) version of a 1 Wire DS18B20-compatible sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C.

Because they are digital, you don’t get any signal degradation even over long distances! These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter.

Dallas DS18B20 One Wire Temperature Sensor work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.

Because each Dallas DS18B20 One Wire Temperature Sensor contains a unique silicon serial number, multiple DS18B20s can exist on the same 1-Wire bus. This allows for placing temperature sensors in many different places. Applications where this feature is useful include HVAC environmental controls, sensing temperatures inside.

We toss in a 4.7k resistor, which is required as a pullup from the DATA to VCC line when using the sensor. Dallas DS18B20 One Wire Temperature Sensor an electronic thermometer which has high accuracy over a wide range . You can locate these thermometer chips up to 100M away from your Arduino.

Features: –

  • Unique 1-Wire interface requires only one port pin for communication .
  • Converts temperature to 12-bit digital word in 750ms (max.)
  • User-definable nonvolatile (NV) alarm settings
  • Alarm search command identifies and addresses devices whose temperature is outside of programmed limits (temperature alarm
  • condition)
  • Available in 8-pin SO (150mil), 8-pin μSOP, and 3-pin TO-92 packages
  • Software compatible with the DS1822
  • Applications include thermostatic controls, industrial systems, consumer products, thermometers, or any thermally sensitive
  • system One Wire Bus System
  • Stainless steel tube 6mm diameter by 30mm long
  • Cable is 36″ long / 91cm, 4mm diameter
  • Contains DS18B20-compatible temperature sensor
  • If your sensor has four wires – Red connects to 3-5V, Black connects to ground and White is data. The copper wire is soldered to the wire shielding
  • If your sensor has three wires – Red connects to 3-5V, Blue/Black connects to ground and Yellow/White is data

Dallas DS18B20 One Wire Temperature Sensor Specifications: –

  • Usable temperature range: -55 to 125°C (-67°F to +257°F)
  • 9 to 12 bit selectable resolution
  • Uses 1-Wire interface- requires only one digital pin for communication
  • Unique 64 bit ID burned into chip
  • Multiple sensors can share one pin
  • ±0.5°C Accuracy from -10°C to +85°C
  • Temperature-limit alarm system
  • Query time is less than 750ms
  • Usable with 3.0V to 5.5V power/data

Applications: –

Applications where this feature is useful include HVAC environmental controls, sensing temperatures inside buildings, equipment or machinery, and process monitoring and control.

Supporting Documents: –
Package: –

1 x Dallas DS18B20 One Wire Temperature Sensor

Related Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Dallas DS18B20 One Wire Temperature Sensor with Thermal Probe”

Vendor Information

  • Store Name: JK HALLROAD
  • Vendor: JK HALLROAD
  • Address: HALL ROAD
    LAHORE
    Punjab
    54000
  • No ratings found yet!
Dallas DS18B20 One Wire Temperature Sensor with Thermal Probe
Dallas DS18B20 One Wire Temperature Sensor with Thermal Probe

 220.00

Majju PK
Logo
Reset Password
Shopping cart