LAN Ethernet 2 Channel Relay Board Delay Switch TCP/UDP Controller Module

The IOT LAN Ethernet 2 Channel Relay Board is a small, easy-to-use device that allows you to control two electrical loads remotely over a network. It is power by a DC 5V input, and can connect to your network using a standard Ethernet cable.

The relay board has two channels, each of which can control independently. Each channel has a built-in relay that can switch on or off using a simple TCP/IP command. The relay board also supports a delay function, which allows you to specify a delay period before the relay is switch on or off.

The IOT LAN Ethernet 2 Channel Relay Board can power by either a DC 5V input or a DC 9-24V input. The input voltage is selected by a jumper on the board. If the jumper is set to 5V, the board will be power by a 5V power supply. If the jumper is set to 9-24V, the board will power by a 9-24V power supply.

The default input voltage is 5V. If you are not sure what input voltage to use, it is best to use a 5V power supply.

The IOT LAN Ethernet 2 Channel Relay Board works on the principle of a relay. A relay is an electrical switch that is controlled by a low-voltage signal. In the case of the IOT LAN Ethernet 2 Channel Relay Board, the low-voltage signal is a TCP/IP command.

When a TCP/IP command is received by the relay board, it activates the relay. This causes the relay to switch on or off, depending on the command. The relay then controls the electrical load that is connected to it.

Features : –

The IOT LAN Ethernet 2 Channel Relay Board has two channels, each of which has a built-in relay. This means that the relay board can control two electrical loads independently.

The relay board also supports a delay function. This allows you to specify a delay period before the relay is switch on or off. This can useful for applications where you need to control the timing of the relay. The LAN Ethernet 2 Channel Relay Board Delay Switch TCP/UDP Controller Module has a number of benefits, including:

• Remote control: The module can be controlled remotely over a network, which allows you to turn on or off electrical loads, monitor the status of electrical loads, or create automated control systems.
• Easy to use: The module is easy to set up and use, and can be controlled using simple commands.
• Supports both TCP and UDP protocols: The module supports both TCP and UDP protocols, which makes it compatible with a wide range of devices and applications.
• Supports a delay function: The module supports a delay function, which allows you to specify a delay period before the relay is switched on or off. This can be useful for applications where you need to control the timing of the relay.
• Can be powered by a DC 5V or 9-24V input: The module can be powered by a DC 5V or 9-24V input, which makes it versatile and adaptable to a variety of applications.

LAN Ethernet 2 Channel Relay Board Specifications : –

Overall, the LAN Ethernet 2 Channel Relay Board Delay Switch TCP/UDP Controller Module is a versatile and easy-to-use device that can use for a variety of applications. It is a great way to add remote control functionality to your projects. here are the specifications of the 2 Channel Lan Ethernet Relay Board TCP UDP Controller Module:

• Input voltage: DC 5V or DC 9-24V
• Power consumption: 1W
• Relay rating: 10A/250VAC or 10A/30VDC
• Delay function: 1-65535 seconds
• Protocols: TCP, UDP
• Interface: Ethernet
• Dimensions: 70mm x 50mm

LAN Ethernet 2 Channel Relay Board Applications : –

The 2 Channel Lan Ethernet Relay Board TCP UDP Controller Module can use for a variety of applications, including:

• Turning on or off lights remotely: This is a common application for the module. You can use it to turn on or off lights in your home or office remotely, or to control lights in a commercial setting.
• Controlling motors or other devices: The module can use to control motors or other devices that are connected to a network. This could use for applications such as controlling a garage door opener, a sprinkler system, or a security system.
• Monitoring the status of electrical loads: The module can use to monitor the status of electrical loads. This could use to track the power usage of a device, or to check if a device is turn on or off.
• Creating automated control systems: The module can use to create automated control systems. This can use for applications such as turning on lights at a certain time, or turning off a motor after a certain period of time.

Here are some specific examples of applications for the 2 Channel Lan Ethernet Relay Board TCP UDP Controller Module:

• Home automation: You could use the module to control lights, thermostats, and other devices in your home remotely.
• IoT applications: You could use the module to control devices that are connected to the internet, such as security cameras or smart locks.
• Industrial automation: You could use the module to control motors, valves, and other devices in industrial settings.
• Scientific research: You could use the module to control experiments or to collect data.

Package : –

1 x LAN Ethernet 2 Channel Relay Board

More Products at majju.pk

• Arduino UNO Rev3 SMD Atmega328 UNO R3 SMD Edition
• MQ6 Gas Sensor LPG & Butane Gases Detection Sensor
• MQ2 Gas Sensor Module Flammable Gas & Smoke Sensor
• Sharp Optical Dust Sensor GP2Y1010AU0F Module
• MQ135 Gas Sensor CO2 Air Quality Sensor
• W5100 Ethernet Network Module for Arduino
• Arduino Mega 2560 R3 with Cable in Pakistan
• Arduino UNO R3 Board With Dip Atmega328p