Name: MP1584EN 5v Eboot Mini MP1584EN Buck Converter Module 3A
SKU: R9C1-19
Price: 110.00 PKR
Availability: InStock

MP1584EN 5v DC-DC step down module is based on the MP1584EN chip, which is capable of driving a 3A load and converts input voltages between 4.5 V to 28 V into a lower voltage between 0.8 V to 20V.

Mini MP1584EN is suitable for applications which need a highly efficient power converter. MP1584EN Buck Converter is a tiny module DC-DC converter chip MP1584.

Lets get high current loads (up to 3A) due to the high conversion rate (1-1.5 MHz), and it is essential, for small size inverter. MP1584EN Module is a highly efficient switching power supply. High efficiency pulsed MP1584 DC-DC converter with a minimum module size MP1584 DC-DC converter provides a high output current. The required output voltage is adjusted with a compact variable resistor.

The range of Mp1584 DC-DC Buck Converter input voltage: 4.5-28V; output voltage range: 0.8V-20V. Converter MP1584 DC-DC operates in buck mode, so the input must be greater than the yield on 1B.

Miniature HW-133-V1.0 is a very simple type of DC-DC converter that produces an output voltage that is less than its input. The buck converter is so named because the inductor always “bucks” or acts against the input voltage. The output voltage of an ideal buck converter is equal to the product of the switching duty cycle and the supply voltage.

MP1584EN Buck Module is a smaller than usual DC-DC buck converter venture down power module with the extent of 22x17x4mm, fit for driving a heap up to 3A with high effectiveness, which can work with Arduino UNO, different mainboards and essential modules.

It can likewise be utilized in DIY versatile power, screen control supply, surrey control, camera control supply, auto control, interchanges gear supply, and different applications requesting for size and weight, (for example, avionics models, and so forth.

Features: –

This easy-to-use and high-performance voltage regulator board allows you to adjust your input voltages in many of your hobby and robotic projects.
There is an empty pin for the connection of input and output voltages on the regulator board. In this way, it can be integrated into a breadboard or different boards by soldering a male header, or you can use it by soldering a cable directly.
In applications made with the card, the input voltage must always be higher than the output voltage.
Wide 4.5V to 28V Operating Input Range
Programmable Switching Frequency from 100kHz to 1.5MHz
High-Efficiency Pulse Skipping Mode for Light Load
Ceramic Capacitor Stable
Internal Soft-Start
Internally Set Current Limit without a Current Sensing Resistor