L298N Motor Driver 2A Dual H-Bridge PWM Control Module

@ MODERN HALLROAD

The L298N Motor Driver is a popular motor driver module that can use to control two DC motors. It has a wide input voltage range of 5V to 35V, and it can output a current of up to 2A per motor. This makes it suitable for a variety of motors, including small stepper motors.

 350.00

Out of stock

The L298N Motor Driver is a popular motor driver module that can use to control two DC motors. It has a wide input voltage range of 5V to 35V, and it can output a current of up to 2A per motor. This makes it suitable for a variety of motors, including small stepper motors.

The L298N Motor Driver uses a H-bridge to control the direction of each motor. This allows you to control the motor to move forward, backward, or to brake. The module also has a PWM output that can be used to control the speed of each motor.

L298N Motor Driver is a versatile tool that can use in a variety of applications. It is perfect for robotics, drones, and other DIY projects. It can also use to control the speed of fans, lights, and other devices.

L298 2a Dual Motor Driver Module with PWM Control USES L298N as the main drive chip. The L298 Motor driver contains a dual channel full H-bridge driver. 

L298 Motor driver contains a dual channel full H-bridge driver. This L298-N Dual H-bridge allows up two DC motors to be independently controlled in both forward and reverse directions via a microcontroller such as an Arduino.

Alternatively, the module is capable of driving a single 4 input stepper motor. It includes an optional on-board 5V regulator for powering its internal logic circuit so only one supply voltage is required (Vm = 6 to 12V).

Screw terminals allow for easy connection of the motor(s) and the power supply.

L298n 2a Based Motor Driver Module , using ST L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3V MCU control.

Features: –

Through this DUAL H Bridge Motor Driver L298N can use the built-in 78m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.

Here are some of the features of the L298N Motor Driver:

  • Wide input voltage range
  • High output current
  • H-bridge for motor direction control
  • PWM output for motor speed control
  • Small and easy to use

L298N L298 Motor Driver 2A Module with PWM Control Specifications: –

you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Control signals are connected to popular goldpin connectors, allowing to connect the circuit to run boards, such as Arduino, using wires.

There is also an onboard 5V regulator, so if your supply voltage is up to 12V you can also source 5V from the board. This L298 2a Dual Motor Driver Module with PWM Control USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability.

Here are some of the Specifications of the L298N Motor Driver:

  • Driver Current:2A
  • Logical Current:0-36mA
  • Maximum Power (W): 25W
  • Current Sense for each motor
  • Heatsink for better performance
  • Power-On LED indicator
  • Driver Model: L298N 2A
  • Driver Chip: Double H Bridge L298N
  • Motor Supply Voltage (Maximum): 46V
  • Motor Supply Current (Maximum): 2A
  • Logic Voltage: 5V
  • Driver Voltage: 5-35V

L298N L298 Motor Driver 2A Module with PWM Control Applications: –

The L298N Motor Driver is a versatile tool that can be used in a variety of applications. It is perfect for robotics, drones, and other DIY projects. It can also be used to control the speed of fans, lights, and other devices.

Here are some of the applications of the L298N Motor Driver:

  • Robotics
  • Drones
  • DIY projects
  • Hobby projects
  • Industrial applications
  • Drive DC motors.
  • Drive stepping motors
L298N L298 Motor Driver 2A Module with PWM Control Pin Description: –

L298N Motor driver 2A Dual H-Bridge PWM Control Module can be used with motors that have a voltage of between 5 and 35V DC.

Pin Name Description
IN1 & IN2 Motor A input pins. Used to control the spinning direction of Motor A
IN3 & IN4 Motor B input pins. Used to control the spinning direction of Motor B
ENA Enables PWM signal for Motor A
ENB Enables PWM signal for Motor B
OUT1 & OUT2 Output pins of Motor A
OUT3 & OUT4 Output pins of Motor B
12V 12V input from DC power Source
5V Supplies power for the switching logic circuitry inside L298N IC
GND Ground pin
Datasheet: –

Datasheet

Package: –

1 x L298N L298 Motor Driver 2A Dual H-Bridge PWM Control Module

Related Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “L298N Motor Driver 2A Dual H-Bridge PWM Control Module”

Vendor Information

  • Store Name: MODERN HALLROAD
  • Vendor: MODERN HALLROAD
  • Address:
  • 5.00 5.00 rating from 1 review
L298N Motor Driver 2A Dual H-Bridge PWM Control Module
L298N Motor Driver 2A Dual H-Bridge PWM Control Module

 350.00

Majju PK
Logo
Reset Password
Shopping cart