LM2596s-Adj Display Module DC-DC Buck Converter with display

The LM2596s-ADJ with display is a step-down module with an integrated digital display. LM2596 display Module is base on the LM2596ADJ IC, which is a high-efficiency, low-dropout regulator that can output up to 3A of current. The display shows the output voltage in real time, which makes it easy to troubleshoot and calibrate the module.

The LM2596 Display Module is easy to use and can configure to output a wide range of voltages. LM2596 module is also very efficient, with an efficiency of up to 92%.

The LM2596ADJ with display can output a voltage range of 1.2V to 37V. The output voltage can adjust using the potentiometer on the module. The display shows the output voltage in real time, which makes it easy to troubleshoot and calibrate the module.

The LM2596 Display Module is a step-down voltage regulator module with an integrated digital display. LM2596 3A Buck Module With Display is base on the LM2596ADJ IC, which is a high-efficiency, low-dropout regulator that can output up to 3A of current. 

A 3 digit 7 segment display is connected to this Module which shows the Voltage. The LM2596 has a built-in digital-to-analog converter (DAC) that can use to generate a voltage signal that is proportional to the output voltage of the module. This voltage signal can then be used to drive the 3 digit 7 segment display.

The LM2596 step-down voltage regulator module is use to reduce the input voltage to a level that is compatible with the 3 digit 7 segment display. The 10k ohm resistor is use to set the reference voltage for the DAC on the LM2596. The 220 ohm resistor is use to limit the current to the 3 digit 7 segment display. The 10uF capacitor is use to filter the output voltage of the LM2596.

Features: –

The LM2596 3A Buck Module With Display is a versatile and easy-to-use step-down voltage regulator module with an integrated digital display. LM2596 Module is base on the LM2596 IC, which is a high-efficiency, low-dropout regulator that can output up to 3A of current. The display shows the output voltage in real time, which makes it easy to troubleshoot and calibrate the module. Here are some of the benefits of using an LM2596 Display Module:

• Easy to use
• Accurate
• Efficient
• Durable
• Wide input voltage range
• Adjustable output voltage

LM2596s-Adj Display Module Specifications: –

LM2596 Display Module is also a good choice for anyone who needs a high-efficiency, low-dropout regulator that is easy to use and can configure to output a wide range of voltages. Here are the specifications of the LM2596 Display Module:

• Input voltage range: 4.5V to 40V
• Output voltage range: 1.25V to 37V
• Output current: up to 3A
• Switching frequency: 150 kHz
• Quiescent current: typically 80 µA
• Thermal shutdown and current limiting
• Digital display: 1602A LCD display
• Display accuracy: 0.1 V
• Dimensions: 62 x 26 x 14mm

LM2596s-Adj Display Module Settings: –

• When the on-board voltmeter displays the output voltage, press and hold the right button for 2 seconds to release, the voltmeter and the output voltage indicator “OUT” flash synchronously. At this time, the output voltage adjustment mode enters, similarly, the voltmeter is displayed. When inputting the voltage, long press the right button for 2 seconds and then release, the voltmeter and the input voltage indicator “IN” flash synchronously, and enter the input voltage adjustment mode at this time;
• Tap the right button to increase the voltage by one unit. Tap the left button to decrease the voltage by one unit. Since the voltage of one unit is less than 0.1V, you need to press 1-5 times to see the voltmeter. Changed by 0.1V, the specific continuous button press depends on the currently displayed voltage value, the higher the current display voltage, the fewer the number of presses;
• After the voltage adjustment is completed, press and hold the right button for 2 seconds and then release. At this point, the voltage calibration mode can be exited, and all parameter settings are automatically powered down.

LM2596s-Adj Display Module Applications: –

The LM2596 3A Buck Module With Display is a versatile and powerful voltage regulator that can use in a wide variety of applications. LM2596 Module is a good choice for anyone who needs a high-efficiency, low-dropout regulator that is easy to use and can configure to output a wide range of voltages. Here are some of the applications of the LM2596 Display Module:

• Powering electronic devices
• Charging batteries
• Creating laboratory power supplies
• Testing electronic circuits

Datasheet: –

ti.com/lit/ds/symlink/lm2596.pdf

Package: –

1 x LM2596s-Adj Display Module DC-DC Buck Converter with display

Related Products at majju.pk

• HW411 LM2596 Buck Converter DC-DC Step Down Module
• 555 Timer IC NE555 DIP-8 Precision Timer Chip
• Tiny RTC I2C Module DS1307 Real Time Clock