XH-W1209 Digital Temperature Sensor and Controller Module

Sold by
sherjaan
@ sherjaan

XH-W1209 Digital Temperature Sensor and Controller Module comes with a temperature sensor, three buttons for temperature setting and some other functional operation, three digital temperature display, and comes with a program update interface can be used to update.

 400.00

In stock

XH-W1209 Digital Temperature Sensor and Controller Module is a highly functional thermostat controller. With the W1209 Digital Temperature Controller you can intelligently control power to most types of electrical device based on the temperature sensed by the included high accuracy temperature sensor No programming skills are required.

The XH-W1209 Digital Temperature Sensor and Controller Module is a low cost yet highly functional self-contained temperature controller module for both heating and cooling applications. 3 mini switches allow for configuring the parameters, on & off trigger temperatures.

The relay can switch up to a maximum of 240V AC at 5A or 14V DC at 10A. The 3 digit segment displays the current temperature in degrees centigrade and the current relay state display by an LED.

XH-W1209 Digital Temperature Sensor and Controller Module can not only show the temperature, but also according to the current temperature of the relay control, it can control some of the power equipment through the relay, industrial and DIY.

XH-W1209 Digital Temperature Sensor and Controller Module comes with a temperature sensor, three buttons for temperature setting and some other functional operation, three digital temperature display, and comes with a program update interface can be used to update.

The thermostat will display the current temperature in oC by default. When in any other mode making no input for approximately 5 seconds will cause the thermostat to return to this default display.

XH-W1209 Digital Temperature Sensor and Controller Module is a programmable thermostat. The same module can be used in both controlling / maintaining Cold and Hot temperatures. Parameter 0 can be set to either Hot or Cold Control setting. The relay module is based on a microcontroller (MCU) and has 7 user configurable parameters accessible using 3 push buttons.

Features: –

  • 3-digit display of temperature
  • Module can operate in a heating or cooling mode of operation
  • Multiple parameters can set such as temp trip point, hysteresis and delay.
  • Waterproof NTC temperature sensor has -30 to +110°C measurement range with 0.1°C accuracy
  • Relay switches up to 120VAC @ 10A or 14VDC @ 10A
  • 12V module operation

Specifications: –

  • Temperature Control Range: -50 ~ 110 C
  • Resolution at -9.9 to 99.9: 0.1 C
  • Resolution at all other temperatures: 1 C
  • Measurement Accuracy: 0.1 C
  • Control Accuracy: 0.1 C
  • Refresh Rate: 0.5 Seconds
  • Input Power (DC): 12V
  • Measuring Inputs: NTC (10K 0.5%)
  • Waterproof Sensor: 0.5M
  • Output: 1 Channel Relay Output,
  • Capacity: 10A
  • Power Consumption: Static Current: <=35mA
  • Current: <=65mA
  • Environmental Requirements Temperature: -10 ~ 60 C
  • Humidity: 20-85%

Setting Description: –

  • Long press the “SET” button to activate the menu.
  • Code Description Range Default Value
  • P0 Heat C/H C
  • P1 Backlash Set 0.1-15 2
  • P2 Upper Limit 110 110
  • P3 Lower Limit -50 -50
  • P4 Correction -7.0 ~ 7.0 0
  • P5 Delay Start Time 0-10 mins 0
  • P6 High-Temperature Alarm 0-110 OFF
  • Long pressing +- will reset all values to their default
Power & Display : –

The module is powered from 12VDC which is connected to the screw terminal block.  This can come from an AC wall adapter or similar power source.

The module has a 3-digit display composed of 0.28″ high red 7-segment displays.

The module will always display the current temperature measurement by default.  Once you stop pushing buttons, after about 5 seconds the display will default back to displaying the temperature.

If you apply power to the module without the sensor attached, it will display ‘LLL‘.  If you plug in the sensor, the current temperature will be displayed which is generally in the 20-25C range.

Datasheet: –

kelco.rs/katalog/images/17670.pdf

Package: –

1 x XH-W1209 Digital Temperature Sensor and Controller Module

Related Products at majju.pk

 

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “XH-W1209 Digital Temperature Sensor and Controller Module”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 2 reviews
XH-W1209 Digital Temperature Sensor and Controller Module
XH-W1209 Digital Temperature Sensor and Controller Module

 400.00

Majju PK
Logo
Reset Password
Shopping cart