5V Stepper Motor 28BYJ-48 Micro Stepping Unipolar
28BYJ-48 ULN2003 5V Stepper Motor is a 5-wire unipolar stepper motor that runs on 5 volts. ULN2003 stepper motor driver board allows you to easily control the 28BYJ-48 stepper motor
₨ 200.00
5V Stepper Motor 28BYJ-48 Micro Stepping Unipolar is widely used to control a myriad of common devices we see every day.
From blinds, car side mirror tilts and DVD players to security cameras and precise control machines, stepper motors are closer to us than we actually think.
28BYJ-48 ULN2003 5V Stepper Motor is a 5-wire unipolar stepper motor that runs on 5 volts.
The interesting thing about this motor is that people have been using it in countless applications over the last few decades. It uses in air-conditioner, vending machines and many other applications.
One of the best things about these motors is that they can be positioned accurately, one ‘step’ at a time. The other advantage is that they are relatively precise in their movement and they are quite reliable since the motor does not use contact brushes.
The 5V 28BYJ-48 Micro stepping Stepper Motor is a commonly used stepper motor. which converts electrical pulses into discrete mechanical rotation.
When electrical signals are applied, the stepper motor rotates in precise and fixed angle increments known as steps.
The motor consists of 4 coils that make a ring around the rotor. These coils are known as the stator, as they are stationary and static. Each coil is rated at +5V, making it easy to control with any microcontroller, such as an Arduino.
They generally give good torque even in the stand-still state which is maintained as long as power is supplied to the motor.
5V Stepper Motor 28BYJ-48 Micro stepping is often used to automatically adjust the vanes of an air conditioner unit. It has a built-in gearbox, which gives it some extra torque and reduces the speed drastically.
Features: –
- Rated Voltage: 5V DC
- Number of Phases: 4
- Stride Angle: 5.625°/64
- Pull in torque: 300 gf.cm
- Insulated Power: 600VAC/1mA/1s
- Coil: Unipolar 5 lead coil
5V Stepper Motor 28BYJ-48 Specifications: –
Rated voltage | 5 V |
Coil Resistance | 50 Ohms |
Coil Type | Unipolar |
Diameter – shaft | 0.197″ (5.00 mm) |
Length – shaft and bearing | 0.394″ (10 mm) |
Features | Flatted shaft |
Size/dimension | Round – 1.100″ dia (28.00 mm) |
Mounting hole spacing | Flatted Shaft |
Gear reduction | 1/64 (see note) |
Step angle | Half step mode (recommended): 0.0879° Full step mode: 0.176° |
Steps per revolution | Half step mode: 4096 (see note) Full step mode: 2048 |
Termination style | Wire leads with connector |
Motor type | Permanent Magnet Gear Motor |
Number of phases | 4 |
5V Stepper Motor 28BYJ-48 Pin Description: –
- N1 – IN4 pins are used to drive the motor. Connect them to a digital output pins on the Arduino.
- GND is a common ground pin.
- VDD pin supplies power for the motor. Connect it to an external 5V power supply. Because the motor draws too much power, you should NEVER use the 5V power from your Arduino to power this stepper motor.
- Motor Connector This is where the motor plugs into. The connector is keyed, so it only goes in one way.
5V Stepper Motor 28BYJ-48 Applications: –
- CNC machines
- Precise control machines
- Security cameras
- DVD Players
- Car side mirror tilt
Datasheet: –
mouser.com/…/stepd-01-data-sheet-1143075.pdf
Package: –
1 x 5V 28BYJ-48 Micro stepping Geared Stepper Motor
Related Products at majju.pk
- 180 Degree Rotation Servo Motor 9G Micro Servo SG90
- Micro Servo MG90s Towerpro MG90s Micro Servo
- SG90 9g Servo Motor RC Mini Servo Motor
- TowerPro SG90 Servo Motor 180 Degree in Pakistan
- Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed
- TowerPro MG90s Servo Motor MG90s Metal Gear Micro Servo
User Reviews
Be the first to review “5V Stepper Motor 28BYJ-48 Micro Stepping Unipolar”
You must be logged in to post a review.
Vendor Information
- Store Name: sherjaan
- Vendor: sherjaan
- Address:
- 5.00 rating from 6 reviews
You may also like…
₨ 200.00
There are no reviews yet.