7 Color Flash KY-034 Automatic Flashing Colorful LED Module

Sold by
sherjaan
@ sherjaan

The 7 Color Flash KY-034 is a small electronic module that contains a 5mm color LED that flashes through a sequence of 7 colors: red, green, blue, yellow, purple, cyan, and white. The sequence is predefined and cannot be modified.

 60.00

In stock

SKU: R4C1-10 Categories: , Tag:

The 7 Color Flash KY-034 is a small electronic module that contains a 5mm color LED that flashes through a sequence of 7 colors: red, green, blue, yellow, purple, cyan, and white. The sequence is predefined and cannot be modified. The module is powered by a voltage of 3.3V to 5V, and it has 3 pins: VCC, GND, and NC. The VCC pin is connected to the positive voltage supply, the GND pin is connected to the ground, and the NC pin is not connected.

The module is easy to use and does not require any programming. Simply connect it to a power supply, and it will start flashing through the 7 colors.

There are two ways to power on the 7 color flash module:

  • Connect VCC directly to +5v of Arduino or Raspberry Pi. This is the simplest way to power the module. Simply connect the VCC pin to the +5v pin on your Arduino or Raspberry Pi. The GND pin should be connected to the ground pin.
  • Connect VCC to any of the available digital pins. This gives you more flexibility, as you can use the module in your Arduino or Raspberry Pi code. Simply connect the VCC pin to any of the available digital pins, and the GND pin to the ground pin.

Once the module is powered on, the LED will start flashing through the 7 colors. The sequence is predefined and cannot be modified.

Automatic Flashing Colorful LED Module is easy to use. It is really no different than using a standard LED. Simply hook up a digital output pin via a current limiting resistor to the VCC pin of the module and provide an logic HIGH signal to turn it on and logic LOW to turn it off as shown here.

Features: –

7 Color Flash KY-034 is a module with an auto-flash led that can flash up to 7 colors. No programming needed. Just connect it with the power supply and it’ll work. KY-034 7 Color Flash module generates 7 different colors automatically in sequence. 7 color flash module has pink, yellow, and green high brightness lights. The flash module generates light of high brightness.

  • Product Type: LED
  • Shape: Round LED 5mm DIP type
  • Lens type: white mist
  • Standard Forward Voltage: 2.5-6V
  • Forward Current: 40mA
  • RGB (red/green/blue) 5mm LED
  • Built-in control logic to cycle through 7 different colors automatically and at various rates

7 Color Flash KY-034 Specifications: –

KY-034 7 Color Flash provides an eye catching flashing display without a lot of work. The LED contains logic built-in to automatically flash the LED at different rates while cycling through the 7 possible colors of red, green, blue, yellow, purple, cyan and white by mixing the different LED colors. The LED body is water clear.

  • Model: YB-3120B4PNYG-PM
  • 7-color 5mm LED with a built-in chip that sequentially blinks each color quickly
  • Super bright pink, yellow and green LED chip
  • 7 colors of fast blinking with blanks , pink, yellow and green
  • Max Forward voltage: 3.5 ~ 4.5V
  • Maximum reverse voltage: 5V
  • Max Forward current: 40mA
  • Maximum reverse current: 5uA
  • Lens: diffuse / clear lens

Applications : –

Automatic Flashing Colorful LED Module is part of the series 37 In 1 Sensor Module is a module that integrates an LED that automatically changes color showing up to 7, the LED appears externally as a common model but in reality It is composed of a CMOS integrated circuit (IC) and an LED

Here are some of the applications of the Automatic Flashing Colorful LED Module:

  • Decorative lighting
  • Alarms
  • Signal indicators
  • Toys
  • Educational projects

The 7 Color Flash KY-034 is a versatile and easy-to-use module that can use in a variety of projects. If you are looking for a way to add some colorful flashing lights to your project, then the 7 Color Flash KY-034 is a great option.

Pin Description: –

7 Color Flash KY-034 Module has 3 pins, VCC, Ground, and 3rd pin is not connected. There are two ways to power on the 7 color flash module.

You can connect VCC directly to +5v of Arduino or Connect VCC to any of the available digital pins. Connecting to digital pins gives freedom to use the module when required in the program. For this, connect VCC to digital pin 11.

  • S = Signal input is attached to a digital output pin on MCU or to can be hooked to 3.3 – 5V to have LED permanently on.  Needs current limiting resistor.
  • – / Center pin =  Ground
  • 3rd pin is not used
Pin Description
(-) GND
Middle Pin +5V
S Signal
Package: –

1 x 7 Color Flash KY-034 Automatic Flashing Colorful LED Module

Related Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “7 Color Flash KY-034 Automatic Flashing Colorful LED Module”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 6 reviews
7 Color Flash KY-034 Automatic Flashing Colorful LED Module
7 Color Flash KY-034 Automatic Flashing Colorful LED Module

 60.00

Majju PK
Logo
Reset Password
Shopping cart