NodeMCU AMICA CP2102 LUA V2 ESP8266 WIFI Dev. Board

NodeMCU AMICA CP2102 is a ESP8266 WIFI Module based development board. LUA V2 ESP8266 has got Micro USB slot that can directly connect to the computer or other USB host devices.

The NodeMCU AMICA CP2102 is a versatile and powerful development board that can use for a wide range of IoT projects. ESP8266 NodeMCU LUA CP2102 ESP-12E is a great choice for beginners and experienced developers alike.

The CP2102 NodeMCU V2 operates at 3.3V. You can also power the ESP8266 CP2102 using the micro USB port. The micro USB port provides 5V power to the board. However, you will need to use a USB power adapter that can output 3.3V for the ESP8266 chip.

The ESP8266 CP2102 V2 is a development board base on the ESP8266 WIFI chip. ESP8266 CP2102 uses the CP2102 USB-to-serial converter chip, which is more reliable and compatible with a wider range of computers than the CH340 chip used in some other NodeMCU boards.

The NodeMCU AMICA CP2102 works on the principle of the USB to serial converter. The CP2102 chip converts the USB data signal to a serial data signal that can be understood by the ESP8266 chip. The CP2102 chip also has a UART (Universal Asynchronous Receiver/Transmitter) interface that allows the ESP8266 chip to communicate with a computer or other devices.

When you connect the NodeMCU AMICA CP2102 to a computer, the CP2102 chip is recognized as a COM port by the computer. You can then use a serial communication program, such as PuTTY, to communicate with the ESP8266 chip.

The ESP8266 CP2102 Development Board has a built-in WIFI module that allows it to connect to a WIFI network. Once the ESP8266 chip is connected to a WIFI network, you can use it to control devices, collect data, and build IoT applications.

Features : –

The NodeMCU ESP8266 operates at 3.3V. The LUA V2 NodeMCU ESP8266 is very easy to use, even for beginners. The board comes with a pre-installed firmware that allows you to start coding right away.

The NodeMCU V2 AMICA is a very affordable development board, making it a great option for beginners and hobbyists. The NODEMCU LUA CP2102 has a wide range of features, including built-in WIFI, 10 GPIO pins, and a 10-bit ADC. This makes it a versatile development board that can use for a variety of projects. The NodeMCU CP2102 has a number of benefits, including:

• Low cost
• Easy to use
• Wide range of features
• Active community
• Open-source
• WIFI connectivity
• 10 GPIO pins
• 10-bit ADC
• Small size
• Low power consumption

NodeMCU AMICA CP2102 Specifications : –

The NodeMCU LUA WIFI ESP8266 CP2102 consumes very little power, making it ideal for battery-powered projects. The small size of the ESP8266 NODEMCU CP2102 ESP-12E makes it easy to fit on breadboards and other prototyping boards. The 10 GPIO pins can use to control external devices, such as LEDs, motors, and sensors.

This ESP8266 CP2102 is a great option for developers who want to customize the board for their specific needs. ESP8266 NodeMCU CP2102 is an open-source project, which means that the firmware and hardware designs are freely available. The NodeMCU CP2102 has the following specifications:

• Operating voltage: 3.3V
• Input voltage: 4.5V to 9V
• Power consumption: 100mA (typical)
• CPU: ESP8266
• Flash: 4MB
• RAM: 512KB
• GPIO pins: 10
• ADC: 10-bit
• WIFI: 802.11 b/g/n
• Interfaces: Micro USB, UART

NodeMCU AMICA CP2102 Pin Descriptions : –

The NodeMCU ESP8266 has a 10-bit ADC. The NodeMCU LUA ESP8266 has two interfaces: Micro USB and UART. The Micro USB interface can use to power the board and program it. The UART interface can use to communicate with the board using a serial communication program.

The NodeMCU V2 AMICA has 4MB of flash memory & 512KB of RAM. The ESP8266 NodeMCU CP2102 consumes about 100mA of power when it is idle. The power consumption will increase when the board is running more demanding tasks. 

The GPIO pins can use to control external devices by setting them to HIGH or LOW. A HIGH signal is represented by a voltage of 3.3V, while a LOW signal is represented by a voltage of 0V.

The GPIO pins can also use to read analog signals. To do this, you need to connect an analog sensor to the pin and then use the ADC (analog-to-digital converter) to convert the analog signal to a digital signal.

NodeMCU AMICA CP2102 Applications : –

The NodeMCU ESP8266 can use to connect sensors and other devices to the internet. NodeMCU LUA ESP8266 can use to create web servers that can access from anywhere in the world.

The CP2102 NodeMCU is a great way to learn about IoT and programming. ESP8266 NodeMCU CP2102 board can use to build a variety of IoT projects, such as smart home devices, environmental monitoring systems, and industrial automation systems. The NodeMCU CP2102 can use to create remote control systems for devices, such as lights, motors, and valves. The NodeMCU CP2102 can use for a wide range of applications, including:

• IoT projects
• Web servers
• IoT gateways
• Remote control systems
• Data logging systems
• Educational projects

Package : –

1 x NodeMCU AMICA CP2102

More Products at majju.pk

• ESP-12e ESP8266 WIFI Module Wireless loT Board Module
• HC-05 Bluetooth Master Slave Transceiver Module
• HC-06 Bluetooth Module
• NodeMCU ESP8266 V3 LUA CH340 WIFI Dev. Board