RPM Measurement Sensor Rotational Speed Measuring Module
The LM393 RPM measurement sensor is a simple and inexpensive way to measure the rotational speed of a motor or other rotating device. RPM measurement sensor consists of an infrared LED and a phototransistor, which are mounted on a small PCB. When the LED is turned on, it emits a beam of infrared light.
₨ 110.00
The LM393 RPM measurement sensor is a simple and inexpensive way to measure the rotational speed of a motor or other rotating device. RPM measurement sensor consists of an infrared LED and a phototransistor, which are mounted on a small PCB. When the LED is turned on, it emits a beam of infrared light. If the beam is interrupted by the rotating shaft, the phototransistor will detect the interruption and generate an electrical pulse. The number of pulses per second is proportional to the rotational speed of the shaft.
The LM393 RPM measurement sensor can be used with a microcontroller to measure the rotational speed of a motor or other rotating device. The microcontroller can count the number of pulses per second and then convert the count to RPM
The LM393 RPM measurement sensor can operate on a voltage range of 3.3V to 5V. The input voltage is applied to the VCC pin of the sensor. The sensor will output a TTL signal on the DO pin, which is active low. The output signal will be high when the sensor is not detecting any pulses, and it will be low when the sensor is detecting pulses.
The LM393 RPM measurement sensor works on the principle of optical coupling. The sensor consists of an infrared LED and a phototransistor, which are mounted on a small PCB. When the LED turned on, it emits a beam of infrared light. If the beam interrupted by the rotating shaft, the phototransistor will detect the interruption and generate an electrical pulse. The number of pulses per second is proportional to the rotational speed of the shaft.
Features : –
The LM393 Rotational Speed Measuring Module is a versatile and easy-to-use tool for measuring rotational speed. It is relatively inexpensive and can use with a variety of microcontrollers. Here are some of the benefits of using the LM393 Rotational Speed Measuring Module:
- Inexpensive: The LM393 Rotational Speed Measuring Module is a very affordable option for measuring rotational speed. It is much cheaper than other types of RPM measurement sensors, such as shaft encoders or laser tachometers.
- Easy to use: The LM393 Rotational Speed Measuring Module is very easy to use. It can connect to a microcontroller with just a few wires. The sensor also has a built-in LED that indicates when it is detecting pulses.
- Versatile: The LM393 Rotational Speed Measuring Module can use to measure the rotational speed of a variety of devices. It can use with motors, fans, generators, and other rotating devices.
- Can be used with a variety of microcontrollers: The LM393 Rotational Speed Measuring Module can use with a variety of microcontrollers. It is compatible with 3.3V and 5V microcontrollers.
RPM Measurement Sensor Specifications : –
The LM393 Rotational Speed Measuring Module is a small, easy-to-use sensor that can use to measure the rotational speed of a variety of devices. It is power by a 3.3V to 5V supply and outputs a TTL signal, active low. The pulse frequency range is 0 to 100Hz, which corresponds to a RPM range of 0 to 6000RPM. The module is 32 x 14 x 7mm in size and weighs 5g.
The LM393 Rotational Speed Measuring Module can use with a variety of microcontrollers. The sensor has a built-in LED that indicates when it is detecting pulses. The module can be easily installed and used. The LM393 Rotational Speed Measuring Module has the following specifications:
- Input voltage: 3.3V to 5V
- Output signal: TTL signal, active low
- Pulse frequency range: 0 to 100Hz
- RPM range: 0 to 6000RPM
- Dimensions: 32 x 14 x 7mm
- Weight: 5g
RPM Measurement Sensor Pin Descriptions : –
The LM393 RPM Measurement Sensor has three pins: VCC, GND, and DO.
- VCC: This pin is the power input for the sensor. It should connect to a 3.3V or 5V power supply.
- GND: This pin is the ground pin for the sensor. It should connect to the ground of the power supply.
- DO: This pin is the output pin for the sensor. It outputs a TTL signal, active low. The output signal will be high when the sensor is not detecting any pulses, and it will be low when the sensor is detecting pulses.
RPM Measurement Sensor Applications : –
The LM393 Rotational Speed Measuring Module is a versatile sensor that can use in a variety of applications. It is affordable, easy to use, and reliable. The LM393 Rotational Speed Measuring Module can use in a variety of applications, including:
- Motor speed control: The sensor can use to measure the speed of a motor and then use that information to control the motor’s speed. This can use in applications such as fans, pumps, and other devices that need to operate at a specific speed.
- Machine monitoring: The sensor can use to monitor the speed of a machine and then use that information to detect problems.
- Safety applications: The sensor can use to detect the presence of rotating objects and then use that information to prevent accidents.
- Scientific research: The sensor can use to measure the speed of objects in scientific research applications.
Package : –
1 x RPM Measurement Sensor
More Products at majju.pk
User Reviews
Be the first to review “RPM Measurement Sensor Rotational Speed Measuring Module”
You must be logged in to post a review.
Vendor Information
- Store Name: sherjaan
- Vendor: sherjaan
- Address:
- 5.00 rating from 6 reviews
₨ 110.00
There are no reviews yet.