TM4C123G Tiva C Series Launchpad Evaluation Kit

@ JK HALLROAD

TM4C123G Tiva C Series Launchpad Evaluation Kit TI Arm Programming for Embedded System is a low-cost evaluation platform for ARM Cortex – M4F – based microcontrollers. The Tiva C Series Launchpad design highlights the TM4C123GH6PMI microcontroller USB 2.0 device interface, hibernation module, and motion control pulse-width modulator (MC PWM) module.

 4,800.00

Only 1 left in stock

TM4C123G Tiva C Series Launchpad Evaluation Kit TI Arm Programming for Embedded System is a low-cost evaluation platform for ARM Cortex – M4F – based microcontrollers. The Tiva C Series Launchpad design highlights the TM4C123GH6PMI microcontroller USB 2.0 device interface, hibernation module, and motion control pulse-width modulator (MC PWM) module.

The TM4C123G Tiva C Series Launchpad also features programmable user buttons and an RGB LED for custom applications. The stackable headers of the Tiva C Series TM4C123G Launchpad Booster Pack XL interface demonstrate how easy it is to expand the functionality of the Tiva C Series Launchpad when interfacing to other peripherals on many existing Booster Pack add-on boards as well as future products.

The TM4C123G Tiva C Series Launchpad provides an easy and inexpensive way to develop applications with the TM4C123GH6PM microcontroller. Tiva C Series Booster Packs and MSP430 Booster Packs expand the available peripherals and potential applications of the Tiva C Series Launchpad.

Booster Packs can be used with the TM4C123G Evaluation Kit or you can simply use the on-board TM4C123GH6PM microcontroller as its processor. See Chapter 2 for more information. Build your own Booster Pack and take advantage of Texas Instruments’ website to help promote it! From sharing a new idea or project, to designing, manufacturing, and selling your own Booster Pack kit, TI offers a variety of avenues for you to reach potential customers with your solutions.

Features: –

  • Tiva TM4C123GH6PMI microcontroller
  • Motion control PWM
  • USB micro-A and micro-B connector for USB device, host, and on-the-go (OTG) connectivity
  • RGB user LED
  • Two user switches (application/wake)
  • Available I/O brought out to headers on a 0.1-in (2.54-mm) grid
  • On-board ICDI
  • Switch-selectable power sources: – ICDI – USB device
  • Reset switch
  • Preloaded RGB quick start application
  • Supported by TivaWare for C Series software including the USB library and the peripheral driver library
  • Tiva C Series TM4C123G Launchpad Booster Pack XL Interface, which features stackable headers to expand the capabilities of the Tiva C Series Launchpad development platform

TM4C123G Tiva C Series Launchpad  Specifications: –

  • 80MHz 32-bit ARM Cortex-M4-based microcontrollers CPU
  • 256KB Flash, 32KB SRAM, 2KB EEPROM
  • Two Controller Area Network (CAN) modules
  • USB 2.0 Host/Device/OTG + PHY
  • Dual 12-bit 2MSPS ADCs, motion control PWMs
  • 8 UART, 6 I2C, 4 SPI
  • On-board In-Circuit Debug Interface (ICDI)
  • USB Micro-B plug to USB-A plug cable
  • Preloaded RGB quick-start application
  • ReadMe First quick-start guide

TM4C123G Tiva C Series Launchpad  GPIO (General Purpose Input Output)

It has 0-43 general purpose input-output pins. Any GPIO can be used as an external edge or level triggered interrupt, it can initial ADC sampling, can change toggle rate up to CPU clock speed on the advanced high-performance bus. Each input pin has a tolerance voltage of 5V in the input configuration. Every GPIO pin also has a weak pull-up, pull-down, and open drain.

There are many registers associated with each of the above I/O ports and they have designated addresses in the memory map. The above addresses are the Base addresses meaning that within that base address we have the registers associated with that port.

Port name Lower address Upper address
GPIO port A 0x40004000 0x40004FFF
GPIO port B 0x40005000 0x40005FFF
GPIO port C 0x40006000 0x40006FFF
GPIO port D 0x40007000 0x40007FFF
GPIO port E 0x40024000 0x40024FFF
GPIO port F 0x40025000 0x40025FFF
Datasheet: –

ti.com/lit/ug/spmu296/spmu296.pdf

TM4C123G Tiva C Series Launchpad

Package: –

The Evaluation Kit contains the following items:

  • Tiva C Series Launchpad Evaluation Board (EK-TM4C123GXL)
  • On-board In-Circuit Debug Interface (ICDI)
  • USB micro-B plug to USB-A plug cable
  • README First document
Related Products at majju.pk

Vendor Information

  • Store Name: JK HALLROAD
  • Vendor: JK HALLROAD
  • Address: HALL ROAD
    LAHORE
    Punjab
    54000
  • No ratings found yet!
TM4C123G Tiva C Series Launchpad Evaluation Kit
TM4C123G Tiva C Series Launchpad Evaluation Kit

 4,800.00

Majju PK
Logo
Reset Password
Shopping cart