PIC18F4520 8-bit PIC Microcontroller PIC18F4520-I/P

@ JK HALLROAD

PIC18F4520 is a PIC microcontroller, introduced Microchip, and mainly used in automation and embedded systems.

 2,500.00

In stock

PIC18F4520 is a PIC microcontroller, introduced Microchip, and mainly used in automation and embedded systems. It comes in three packages known as PDIP, QFN, and TQFP where the first one is 40-pin

PIC18F4520 is an 8-bit enhanced flash PIC microcontroller that comes with nanoWatt technology and is based on RISC architecture. Many electronic applications house this controller and cover wide areas ranging from home appliances, industrial automation, security system and end-user products.

This microcontroller has made a renowned place in the market and becomes a major concern for university students for designing their projects, setting them free from the use of a plethora of components for a specific purpose, as this controller comes with inbuilt peripheral with the ability to perform multiple functions on a single chip.

PIC18F4520 is a low-cost, low-power, high-speed 8-bit, fully-static Microcontroller unit with 40 pins, 36 of which can be used as I / O pins. It has power-on-reset (POR) and the WDT circuitry (Extended Watchdog Timer), which can be programmed for 4 ms to 131 s.

The PIC18F Microcontrollers from Microchip are the most capable 8-bit devices within Microchip’s offer.

Available within the range is CAN, LIN and Ethernet capability as part of a comprehensive range of peripherals to meet the needs of embedded applications and versions featuring XLP Technology for where power consumption is a key consideration.

Features: –

  • 40 MHz Max. CPU Speed
  • 75 Instructions – 83 with Extended Instruction Set Enabled
  • 31 Level Hardware Stack
  • Configurable Internal Oscillator – Selectable Frequency Range 8 MHz to 31 kHz
  • 36 I/O Pins
  • Nano Watt Technology
  • Power-On Reset (POR)
  • Power-Up Timer (PWRT)
  • Oscillator Start-Up Timer (OST)
  • Brown-Out Reset (BOR)
  • Extended Watchdog Timer (WDT)
  • High/Low-Voltage Detection (HLVD) Module
  • Low-Voltage Programming (LVP)
  • In-Circuit Serial Programming (ICSP)
  • In-Circuit Debug (ICD)

PIC18F4520 8-bit PIC Microcontroller Specifications: –

  • 40-pin Low Power Microcontroller
  • Flash Program Memory: 32 kbytes
  • EEPROM Data Memory: 256 bytes
  • SRAM Data Memory: 1536 bytes
  • I/O Pins: 36
  • Timers: One 8-bit / Three 16-Bit
  • A/D Converter: 10-bit Thirteen Channels
  • PWM: 10-bit Two Modules
  • Enhanced USART: Addressable with RS-485, RS-232 and LIN Support
  • MSSP: SPI and I²C Master and Slave Support
  • External Oscillator: up to 40MHz
  • Internal Oscillator: 8MHz

PIC18F4520 8-bit PIC Microcontroller Applications: –

  • Input-Output operations
  • Control Applications
  • Analog data Processing
  • Sensors integration and data logging
  • Small scale, low cost embedded application based production

PIC18F4520 8-bit PIC Microcontroller Pin Description: –

Number Pin Name Description
1 MCLR / VPP / RE3 MCLR[Master Clear (Reset) input] is used during programming, mostly connected to a programmer like PicKit / Programming voltage input or 3rd pin of PORTE
2 RA0 / AN0 0th pin of PORTA or Analog pin 0
3 RA1 / AN1 1st pin of PORTA or Analog pin 1
4 RA2 / AN2 / VREF- / CVREF 2nd pin of PORTA or Analog pin 2 or A/D reference voltage(low) input or Comparator reference voltage output
5 RA3 / AN3 / VREF+ 3th pin of PORTA or Analog pin 3 or A/D reference voltage (high) input
6 RA4 / T0CKI / C1OUT 4th pin of PORTA or Timer0 external clock input or Comparator 1 output
7 RA5 / AN4 / SS / HLVDIN / C2OUT 5th pin of PORTA or Analog pin 4 or SPI slave select input or High/Low-Voltage Detect input or Comparator 2 output
8 RE0 / RD / AN5 0th pin of PORTE or Read control for Parallel Slave Port or Analog pin 5
9 RE1 / WR / AN6 1st pin of PORTE or Write control for Parallel Slave Port or Analog pin 6
10
RE2 / CS / AN7
2nd pin of PORTE or Chip Select control for Parallel Slave Port or Analog pin 7
11 Vdd Positive Pin of MCU (+5V)
12 Vss Ground Pin of MCU
13 OSC1 / CLKI / RA7 7th pin of PORTA or Oscillator crystal or external clock input
14 OSC2 / CLKO / RA6 6th pin of PORTA or Oscillator crystal or external clock output
15 RC0 / T1OSO / T13CKI 0th pin of PORTC or Timer1 oscillator output or Timer1/Timer3 external clock input
16 RC1 / T1OSI / CCP2 1st pin of PORTC or Timer1 oscillator input or Capture 2 input / Compare 2 output / PWM2 output
17 RC2 / CCP1 / P1A 2nd pin of PORTC or Capture 1 input / Compare 1 output / PWM1 output or Enhanced CCP1 output
18 RC3 / SCK / SCL 0th pin of PORTC or Serial Clock In/Out for SPI & I2C
19 RD0 / PSP0 0th pin of PORTD or Parallel Slave Port data
20
RD1 / PSP1
1st pin of PORTD or Parallel Slave Port data
21 RD2 / PSP2 2nd pin of PORTD or Parallel Slave Port data
22 RD3 / PSP3 3th pin of PORTD or Parallel Slave Port data
23 RC4 / SDI / SDA 4th pin of PORTC or SPI data in or I2C data in/out
24 RC5 / SDO 5th pin of PORTC or SPI data out
25 RC6 / TX / CK 6th pin of PORTC or USART asynchronous transmit or USART synchronous clock
26 RC7 / RX / DT 7th pin of PORTC or USART asynchronous receive or USART synchronous data
27 RD4 / PSP4 4th pin of PORTD or Parallel Slave Port data
28 RD5 / PSP5 / P1B 5th pin of PORTD or Parallel Slave Port data or Enhanced CCP1 output.
29 RD6 / PSP6 / P1C 6th pin of PORTD or Parallel Slave Port data or Enhanced CCP1 output.
30
RD7 / PSP7 / P1D
7th pin of PORTD or Parallel Slave Port data or Enhanced CCP1 output.
31 Vss Ground Pin of MCU
32 Vdd Positive Pin of MCU (+5V)
33 RB0 / IN0 / FLT0 / AN12 0th pin of PORTB or External interrupt 0 or PWM Fault input for Enhance CCP1 or Analog pin 12
34 RB1 / INT1 / AN10 1st pin of PORTB or External interrupt 1 or Analog pin 10
35 RB2 / INT2 / AN8 2nd pin of PORTB or External interrupt 2 or Analog pin 8
36 RB3 / AN9 / CCP2 3th pin of PORTB or Analog pin 9 or Capture 2 input / Compare 2 output / PWM2 output
37 RB4 / KBI0 / AN11 4th pin of PORTB or Interrupt-on-Change pin or Analog pin 11
38 RB5 / KBI1 / PGM 5th pin of PORTB or Interrupt-on-Change pin or Low-Voltage ICSP™ Programming enable
39 RB6 / KBI2 / PGC 6th pin of PORTB or Interrupt-on-Change pin or In-Circuit Debugger and ICSP programming data pin.
40
RB7 / KBI3 / PGD
7th pin of PORTB or Interrupt-on-Change pin or In-Circuit Debugger and ICSP programming data pin.

 

Datasheet: –

ww1.microchip.com/…n/DeviceDoc/39631E.pdf

Package: –

1 x PIC18F4520 8-bit PIC Microcontroller

Related Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “PIC18F4520 8-bit PIC Microcontroller PIC18F4520-I/P”

Vendor Information

  • Store Name: JK HALLROAD
  • Vendor: JK HALLROAD
  • Address: HALL ROAD
    LAHORE
    Punjab
    54000
  • No ratings found yet!

You may also like…

PIC18F4520 8-bit PIC Microcontroller PIC18F4520-I/P
PIC18F4520 8-bit PIC Microcontroller PIC18F4520-I/P

 2,500.00

Majju PK
Logo
Reset Password
Shopping cart