Zener Diode 6.2V 1W 1N4735A is a type of semiconductor diode that is used to regulate voltage. It has a reverse-biased Zener voltage of 6.2V, which means that it will allow current to flow in the reverse direction when the voltage reaches 6.2V. The 1W rating indicates that the diode can dissipate up to 1 watt of power without being damaged.

Zener diodes are often used in circuits to protect other components from overvoltage. They can also be used to create voltage references or to produce a constant current.

A 6.2 Volt Zener diode is a type of diode that allows current to flow in the reverse direction when the voltage reaches 6.2 Volts. It is often used in circuits to protect other components from overvoltage.

Zener diodes are typically marked with a black band on the cathode (negative) lead and a silver band on the anode (positive) lead. The zener voltage is typically stamped on the diode, in this case 6.2 Volts.

Zener Diode 6.2V 1W is another form of diode which comes in Through-hole package. Zener diode will mostly be used in a protection circuit or in a crude voltage regulator circuit. Either way, it very important to remember that a Zener diode should always be used along with a Zener resistor.

Zener diodes are available in a variety of power ratings, from a few milliwatts to several watts. The power rating is important because it determines how much current the diode can safely handle. For example, a 6.2 Volt 1 Watt Zener diode can handle up to 1 Watt of power.

Features: –

The 1N4735A 6.2V Zener Diode has a nominal voltage of 6.2V and like other types of Zener diodes, it can be used as a reference element in voltage regulation, and it can also be used in switching applications and clipper circuits.

High reliability
Very sharp reverse characteristic
Low reverse current level
±5% VZ tolerance
Silicon planar power Zener diodes
For use in stabilizing and clipping circuits with high power rating.

Zener Diode 6.2V 1W 1N4735A Specifications: –

Zener Diode 6.2V 1W 1N4735 is a high-power with a low reverse leakage current and accurate working voltage.

Attribute	Value
Diode Configuration	Single
Nominal Zener Voltage	6.2V
Mounting Type	Through Hole
Number of Elements per Chip	1
Maximum Power Dissipation	1 W
Package Type	DO-41
Zener Type	General Purpose
Zener Voltage Tolerance	5.00%
Pin Count	2
Test Current	41mA
Maximum Zener Impedance	2Ω
Maximum Reverse Leakage Current	10µA
Dimensions	2.72 (Dia.) x 5.2mm
Maximum Operating Temperature	+200 °C
Minimum Operating Temperature	-65 °C