KY-028 Digital NTC Thermistor Temperature Sensor
The KY-028 is a Digital NTC Thermistor Temperature Sensor which is a small, easy-to-use module that can be used to measure temperatures in the range of -55°C to 125°C.
₨ 140.00
The KY-028 is a Digital NTC Thermistor Temperature Sensor which is a small, easy-to-use module that can be used to measure temperatures in the range of -55°C to 125°C. It has both digital and analog outputs, and a potentiometer to adjust the detection threshold on the digital interface.
The module consists of an NTC thermistor, an LM393 dual differential comparator, a 3296W trimmer potentiometer, 6 resistors, 2 LEDs, and 4 male header pins. The NTC thermistor is a type of resistor whose resistance decreases with increasing temperature. The LM393 comparator compares the resistance of the thermistor to a reference voltage, and outputs a digital signal if the temperature exceeds a certain threshold. The potentiometer is used to adjust the threshold temperature.
The KY-028 module is compatible with a wide range of microcontrollers, including Arduino, Raspberry Pi, and ESP32. It can be used in a variety of applications, such as temperature monitoring, thermostat control, and home automation.
The KY-028 Digital Thermistor Temperature Sensor Module can operate with an input voltage of 3.3V to 5.5V. This means that it can be powered by a wide range of sources, including a USB port, a battery, or a regulated power supply.
The 4PIN Thermistor Temperature Sensor Module is compatible with a wide range of microcontrollers, including Arduino, Raspberry Pi, and ESP32.
KY-028 Temperature Sensor Module has both digital and analog outputs. The digital output is a logic level signal that is either HIGH or LOW, depending on whether the temperature is above or below the threshold. The analog output is a voltage signal that is proportional to the temperature.
If you are looking for a simple, easy-to-use temperature sensor module, the 4PIN Thermistor Temperature Sensor Module is a great option.
Features : –
The NTC thermistor in the KY-028 module is connected to an LM393 comparator. The LM393 comparator compares the resistance of the thermistor to a reference voltage. If the resistance of the thermistor is lower than the reference voltage, the LM393 comparator outputs a digital signal. The digital signal can use to control other devices, such as LEDs or buzzers.
The KY-028 Temperature Sensor Module has a number of benefits, including:
- Easy to use: The module is easy to set up and use. It can connect to a wide range of microcontrollers, including Arduino, Raspberry Pi, and ESP32.
- Versatile: The module can be used in a variety of applications, such as temperature monitoring, thermostat control, and home automation.
- Accurate: The module is relatively accurate, with a temperature measurement range of -55°C to 125°C.
- Cost-effective: The module is relatively inexpensive, making it a good option for budget-minded projects.
Here are some of the specific benefits of the KY-028 Temperature Sensor Module:
- Digital and analog outputs: The module has both digital and analog outputs, which makes it versatile for a variety of applications. The digital output can use to trigger alarms or other events, while the analog output can use to measure the temperature more precisely.
- Potentiometer to adjust the threshold temperature: The potentiometer on the module can use to adjust the threshold temperature. This allows you to customize the module to meet your specific needs.
- Built-in voltage regulator: The module has a built-in voltage regulator, which makes it compatible with a wide range of input voltages. This means that you can power the module from a variety of sources, such as a USB port, a battery, or a regulated power supply.
KY-028 Digital NTC Thermistor Temperature Sensor Specifications : –
The KY-028 temperature sensor module also has a potentiometer that can use to adjust the detection threshold. The detection threshold is the temperature at which the LM393 comparator will output a digital signal. By adjusting the potentiometer, you can change the temperature at which the module will trigger.
The KY-028 Temperature Sensor Module is compatible with a wide range of microcontrollers, including Arduino, Raspberry Pi, and ESP32. It can use in a variety of applications, such as temperature monitoring, thermostat control, and home automation. The KY-028 Temperature Sensor Module has the following specifications:
- Temperature measurement range: -55°C to 125°C
- Input voltage: 3.3V to 5.5V
- Digital output: Logic level signal that is either HIGH or LOW, depending on whether the temperature is above or below the threshold
- Analog output: Voltage signal that is proportional to the temperature
- Potentiometer to adjust the threshold temperature: The potentiometer on the module can be used to adjust the threshold temperature. This allows you to customize the module to meet your specific needs.
- Built-in voltage regulator: The module has a built-in voltage regulator, which makes it compatible with a wide range of input voltages. This means that you can power the module from a variety of sources, such as a USB port, a battery, or a regulated power supply.
- Dimensions: 15mm x 36mm [0.6in x 1.4in]
- Weight: 3g
KY-028 Digital NTC Thermistor Temperature Sensor Pin Descriptions : –
The KY-028 Digital Thermistor Temperature Sensor Module has both digital and analog outputs. The digital output is a logic level signal that is either HIGH or LOW, depending on whether the temperature is above or below the threshold. The analog output is a voltage signal that is proportional to the temperature.
The digital output is useful for applications where you need to know whether the temperature is above or below a certain threshold. The NTC Temperature Sensor Module has 4 pins, each with a specific function.
- VCC: This pin provides the power supply for the module. The voltage range is 3.3V to 5.5V.
- GND: This pin is the ground pin for the module.
- DO: This pin is the digital output pin for the module. The output is either HIGH or LOW, depending on whether the temperature is above or below the threshold.
- AO: This pin is the analog output pin for the module. The output is a voltage signal that is proportional to the temperature.
KY-028 Digital NTC Thermistor Temperature Sensor Applications : –
The NTC Temperature Sensor Module is a versatile and easy-to-use module that can use in a variety of applications. It is compatible with a wide range of microcontrollers, making it a great choice for a variety of projects. The NTC Temperature Sensor Module can use in a variety of applications, including:
- Home automation
- Industrial control
- Scientific research
- Weather monitoring
- Medical devices
- HVAC systems
- Food safety
- And more
Package : –
1 x KY-028 Digital NTC Thermistor Temperature Sensor
More Products at majju.pk
User Reviews
Be the first to review “KY-028 Digital NTC Thermistor Temperature Sensor”
You must be logged in to post a review.
Vendor Information
- Store Name: sherjaan
- Vendor: sherjaan
- Address:
- 5.00 rating from 6 reviews
Voice Recognition Module With Microphone Dupont Jumper Wire for Arduino
0.91 OLED ESP8266 Wifi Kit8 Development Board for Arduino NodeMCU 128X32 White CP2104
TM1638 Module Key Display For AVR Arduino New 8-Bit Digital LED Tube 8-Bit
₨ 140.00
There are no reviews yet.