Digispark Rev 3 Attiny85 USB Development Board

The Digispark Rev 3 Attiny85 is a small, USB based development board that is based on the Attiny85 microcontroller. Digispark Attiny85 USB Development Board is a popular choice for hobbyists and makers due to its small size, low cost, and easy-to-use programming environment.

The HW-018 Digispark ATtiny85 is a good choice for beginners and experienced makers alike. Digispark HW-018 is a small, affordable, and versatile microcontroller that can use to create a variety of projects.

The ATtiny85 Development board has a number of features that make it a versatile development board. Attiny85 module has 6 digital I/O pins, 1 analog input pin, and a built-in USB interface. It can program by using the Arduino IDE, and it supports a wide range of shields and accessories.

The Digispark Attiny85 is small enough to fit on a keychain, making it a great tool for prototyping and experimentation. It is also very affordable, making it a great option for students and hobbyists.

The Attiny85 is a 5V, 8-bit microcontroller that has 20 pins, 16KB of program memory, and 512 bytes of RAM. It is based on the AVR architecture and can be programmed using the Arduino IDE.

Overall, the Attiny85 USB board is a great option for beginners and hobbyists who are looking for a small, affordable, and easy-to-use development board. It is not as powerful as some other development boards, but it is still a versatile and powerful tool.

The Attiny85 Microcontroller board has 512 bytes of SRAM, which is use to store temporary data. This means that it can only store a limited amount of data at a time. The SRAM is volatile, which means that the data is lost when the power is turned off. This means that you need to make sure to save any important data to the flash memory before you turn off the power.

Features : –

The Attiny85 Module is a small, affordable, and versatile microcontroller development board that is based on the ATtiny85 chip. It has 6 I/O pins, 8KB of flash memory, and 512 bytes of SRAM. HW-018 Digispark ATtiny85 can program using the Arduino IDE and use to create a variety of projects. Here are some of the benefits of using the Digispark REV 3 Attiny85:

• Small size
• Low cost
• Easy-to-use programming environment
• Versatile

Digispark Rev 3 Attiny85 Specifications : –

The Digispark Kickstarter ATtiny85 works by executing a program that is stored in its flash memory. The program is written in a programming language such as C or Arduino. The program tells the microcontroller what to do, such as blinking an LED or reading a sensor. The Digispark REV 3 Attiny85 has the following specifications:

• Microcontroller: Attiny85
• Operating Voltage: 2.7V – 5.5V
• Flash Memory: 8KB
• RAM: 512 bytes
• Digital I/O Pins: 6
• Analog Input Pin: 1
• USB Interface: Yes
• Programming Environment: Arduino IDE
• Dimensions: 18mm x 24mm x 4mm
• Weight: 2 grams

Digispark Rev 3 Attiny85 Pin Descriptions : –

The Attiny85 Microcontroller has 8KB of flash memory, which is used to store the program code. Digispark Attiny85 also has 512 bytes of SRAM, which is used to store temporary data. The Digispark REV 3 Attiny85 has 6 digital I/O pins, 1 analog input pin, and a USB interface. The pins  description as follows:

• PB0: Digital I/O pin, also used as the reset pin.
• PB1: Digital I/O pin.
• PB2: Digital I/O pin.
• PB3: Digital I/O pin.
• PB4: Digital I/O pin.
• PB5: Analog input pin, also used as the programming port.

Digispark Rev 3 Attiny85 Applications : –

The Digispark Kickstarter ATtiny85 is a small, affordable, and versatile microcontroller development board. Digispark Attiny85 is base on the ATtiny85 chip and has 6 I/O pins, 8KB of flash memory, and 512 bytes of SRAM. It can be programmed using the Arduino IDE and used to create a variety of projects.

The Digispark Kickstarter ATtiny85 is a great way to learn about microcontrollers and embedded systems. Digispark Attiny85 is also a good choice for small, battery-powered projects. Here are some of the projects you can do with the Digispark REV 3 Attiny85 pins:

• LED blinking
• Button press detection
• Serial communication
• Analog-to-digital conversion
• Real-time clock
• PWM output
• Servo motor control
• Music player
• Game controller
• Security system
• And more!
• Create a simple LED blinker
• Control a motor
• Read a temperature sensor
• Create a custom firmware for a USB device

Package : –

1 x Digispark Rev 3 Attiny85 USB Development Board

More Products at majju.pk

• FT232RL FTDI USB TO TTL Serial Converter Adapter
• ESP 01 Programmer USB TO ESP8266 WIFI Development Module
• KY-023 Analog Joystick Dual Axis XY Joystick Module
• DHT11 Module Temperature Humidity Sensor for Arduino
• Arduino Mega 2560 R3 with Cable in Pakistan