JSN-SR04T Waterproof Ultrasonic Distance Sensor Module

Sold by
sherjaan
@ sherjaan

The JSN-SR04T is a waterproof ultrasonic distance measuring module that uses ultrasonic waves to measure the distance to an object. The Ultrasonic JSN-SR04T works by emitting a short ultrasonic pulse and then measuring the time it takes for the pulse to return.

 1,100.00

In stock

SKU: R3C2-1 Category: Tags: , , ,

The JSN-SR04T is a waterproof ultrasonic distance measuring module that uses ultrasonic waves to measure the distance to an object. The Ultrasonic JSN-SR04T works by emitting a short ultrasonic pulse and then measuring the time it takes for the pulse to return. The distance to the object is then calculated using the speed of sound. The JSN-SR04T has a maximum range of 600 centimeters and a minimum range of 20 centimeters. The accuracy of the sensor is typically ±3 millimeters.

The Ultrasonic JSN-SR04T is a versatile and reliable ultrasonic distance measuring module that is suitable for a wide range of applications. JSN-SR04T Waterproof Ultrasonic Module is easy to use and can interface with a variety of microcontrollers, such as Arduino and Raspberry Pi.

The operating voltage is one of the most important specifications of an ultrasonic sensor. It is important to make sure that the sensor is operating at the correct voltage in order to ensure accurate measurements.

You can also use a separate 5 V power supply to power the sensor. If you are using a separate power supply, you need to connect the positive terminal of the power supply to the VCC pin on the sensor and the negative terminal of the power supply to the GND pin on the sensor.

The JSN SR04T Ultrasonic Sensor works by emitting a short ultrasonic pulse and then measuring the time it takes for the pulse to return. The distance to the object is then calculated using the speed of sound.

The ultrasonic sensor has two pins:

  • TRIG (Trigger) – This pin is used to trigger the ultrasonic pulse.
  • ECHO (Echo) – This pin is used to read the echo signal.

To use the sensor, you first need to trigger it by sending a high signal to the TRIG pin for at least 10 microseconds. This will cause the sensor to emit an ultrasonic pulse. The pulse will travel through the air until it hits an object and is reflected back to the sensor. The sensor will then detect the echo signal on the ECHO pin.

Features : –

The JSN-SR04T sensor is fully waterproof, making it suitable for use in outdoor or wet environments. The Ultrasonic JSN-SR04T sensor has a separate probe and module design, which allows for flexible installation. This makes it easier to install the sensor in a variety of locations. The JSN-SR04T Waterproof Ultrasonic Module has a number of benefits, including:

  • Waterproof
  • Long measurement range
  • High accuracy
  • Separate probe and module design
  • Easy to use

JSN-SR04T Waterproof Ultrasonic Sensor Specifications : –

The JSN SR04T Ultrasonic Sensor must be operated at a voltage of 5 V DC. The Ultrasonic sensor JSN-SR04T consumes an operating current of 30 mA. This means that it will draw 30 milliamperes of current from the power supply when it is operating. here are some of the specifications of the Waterproof Ultrasonic Module JSN SR04T:

  • Operating voltage: 5 V DC
  • Operating current: 30 mA
  • Acoustic emission frequency: 40 kHz
  • Maximum range: 600 cm
  • Minimum range: 20 cm
  • Accuracy: ±2 mm
  • Dimensions: 41 mm x 28.5 mm

JSN-SR04T Waterproof Ultrasonic Sensor Pin Description : –

The JSN SR04T Sensor operates at a voltage of 5 V DC. This means that you need to connect it to a 5 V power supply in order to use it. The module will not work if it is connected to a lower or higher voltage. The Waterproof Ultrasonic Module JSN SR04T has four pins:

  • VCC (Power): This pin is connect to the 5 V power supply.
  • TRIG (Trigger): This pin is use to trigger the ultrasonic pulse.
  • ECHO (Echo): This pin is use to read the echo signal.
  • GND (Ground): This pin is connect to the ground.
JSN-SR04T Waterproof Ultrasonic Sensor Applications : –

The Waterproof Ultrasonic Module JSN-SR04T has an accuracy of ±2 mm. This means that the distance measurement is accurate to within 2 millimeters. The JSN-SR04T Waterproof Ultrasonic Distance Sensor Module can use in a variety of applications, including:

  • Robotic arm obstacle avoidance
  • Distance measurement for self-driving cars
  • Level detection for water tanks
  • Object detection for security systems
  • Proximity sensor for smart home devices
  • Monitoring the distance between moving objects
  • Measuring the speed of objects
  • Determining the location of objects
  • Creating 3D maps

These are just a few of the many applications of the JSN-SR04T Waterproof Ultrasonic Distance Sensor Module. The versatility and reliability of this sensor make it a valuable tool for a wide range of applications.

Package : –

1x JSN-SR04T Waterproof Ultrasonic Distance Sensor

More Products at majju.pk

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “JSN-SR04T Waterproof Ultrasonic Distance Sensor Module”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 6 reviews

You may also like…

JSN-SR04T Waterproof Ultrasonic Distance Sensor Module
JSN-SR04T Waterproof Ultrasonic Distance Sensor Module

 1,100.00

Majju PK
Logo
Reset Password
Shopping cart