NRF24L01+ 2.4 Ghz PA LNA Wireless Radio Transceiver Module

NRF24L01+ 2.4 Ghz PA LNA Wireless Radio Transceiver Module is a popular choice for a variety of wireless projects. It is a versatile and powerful module that is easy to use and has a wide range of features.

NRF24L01 PA LNA is a wireless transceiver module that includes a power amplifier (PA) and a low-noise amplifier (LNA). The PA increases the power of the transmitted signal, while the LNA amplifies the received signal. This can improve the range and performance of the NRF24L01 module.

The PA and LNA are mounted on a small PCB that connects to the NRF24L01 module. The PCB also includes a SMA antenna connector. The NRF24L01 PA LNA module can be used with any microcontroller that can communicate with the NRF24L01 module.

The NRF24L01 PA LNA module is a great way to improve the range and performance of your NRF24L01 projects. It is a small, easy-to-use module that can be used with any microcontroller.

The NRF24L01+ is a popular choice for many projects due to its small size, low cost, and wide range of features. It is also relatively easy to use, making it a good choice for beginners.

WIFI NRF24L01 Radio Module is a PA LNA 2.4 GHZ Wireless RF Transceiver, meaning each module can both send as well as receive data.

Each NRF24L01 transceiver module has an address range of 125 and each module can communicate with 6 other modules because of this it is possible to have multiple wireless units communicating with each other in a particular area.

If you are looking for a way to improve the range and performance of your NRF24L01 projects, the NRF24L01 PA LNA module is a great option. It is a small, easy-to-use module that can be used with any microcontroller.

Features: –

NRF24L01 is a powerful and versatile wireless transceiver module that can be used for a variety of applications. It is easy to use and has a wide range of features. If you are looking for a way to add wireless capabilities to your projects, the NRF24L01 is a great option.

• 2.4 GHz operation: The NRF24L01+ operates in the 2.4 GHz ISM band, which is a globally unlicensed band that is free to use for a variety of applications.
• High data rate: The NRF24L01+ can transmit data at data rates up to 2 Mbps, which makes it suitable for applications that require high-speed data transfer.
• Long range: The NRF24L01+ has a range of up to 100 meters in open air, making it suitable for a variety of outdoor applications.
• Low power consumption: The NRF24L01+ consumes very little power, making it ideal for battery-powered applications.
• 2.4GHz RF transceiver Module
• Operating Voltage: 3.3V
• Nominal current: 50mA
• Range : 50 – 200 feet
• Operating current: 250mA (maximum)
• Communication Protocol: SPI
• Baud Rate: 250 kbps – 2 Mbps.
• Channel Range: 125
• Maximum Pipelines/node : 6
• Low cost wireless solution

NRF24L01+ 2.4 Ghz PA LNA Module Specifications: –

This NRF24L01 2.4 GHZ RF Module is low power RF transceiver modules that can use for wireless communications at up to 100 meters. NRF24L01 wireless module operate in the 2.4GHz band at data rates of 250Kbps, 1Mbps or 2Mbps and at a range of up to 100 meters. Max operating current is < 14mA.

• Maximum operating speeds up to 2Mbps
• GFSK modulation efficiency, Anti-interference ability
• Particularly suitable for industrial control applications.
• 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs
• Built-in hardware CRC error detection, Multipoint communication address control.
• Low-power 1.9 ~ 3.6V, only 1uA on Power-down mode
• Built-in 2.4Ghz antenna
• Available software to set the address only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
• Built-in voltage regulator
• Standard DIP Pitch Interface for embedded applications

NRF24L01+ 2.4 Ghz PA LNA Module Technical Details: –

The NRF24L01 RF Module operates at 1.9V – 3.6V, but the I/O is 5V tolerant, so it can be directly connected to a 5V Arduino or other microcontroller without using any logic level converters.

• Operating voltage: 1.9 – 3.6 V
• Current consumption:
• Transmit mode: 9.0 mA
• Receive mode: 12.3 mA
• Standby mode: 0.05 mA
• Data transfer rate: 250 kbps, 1 Mbps, or 2 Mbps
• Antenna type: Built-in 2.4 GHz antenna
• Number of channels: 125
• Modulation: GFSK
• Data packet size: Up to 32 bytes
• Range: Up to 100 meters in open air
• Power consumption: Very low

NRF24L01+ 2.4 Ghz PA LNA Module Pin Description: –

NRF24L01 wireless transceiver uses 5 signal pins in addition to the power and ground pins. Communications with the module use the SPI bus which is composed of 3 pins (MOSI, MISO, SCK). These pins connect to the same SPI pins on the microcontroller.

• GND – Ground. Connect to ground on microcontroller
• VCC – 1.9 – 3.6V. Typically connected to 3.3V on the microcontroller unless adapter module is being used.
• CE – Chip Enable. Sets whether module is in RX or TX mode.
• CSN – SPI Chip Select
• SCK – SPI Clock
• MOSI – SPI Slave Data Input
• MISO – SPI Slave Data Output
• IRQ –Maskable Interrupt

NRF24L01+ 2.4 Ghz PA LNA Module Applications: –

• Wireless Control application
• Mesh Networks
• RF Remote Controllers
• Connected devices

Datasheet: –

datasheetspdf.com/…9184/Nordic/NRF24L01/1

Package: –

1 x NRF24L01+ 2.4 Ghz PA LNA Module

Related Products at majju.pk

• NodeMCU Lua Lolin V3 Module Esp8266 ESP-12E with CH340
• OLED 0.96 inch Display SSD1306 OLED I2C 128X64 Display
• Produino USB 1200mA DC 2~5V to DC 5V Voltage
• Produino USB 800MA DC 2~5V TO DC 5V Voltage Module
• WIFI NRF24L01 Radio Module NRF24L01+ PA LNA 2.4 GHZ Wireless RF Transceiver
• LM2596s-Adj Display Module DC-DC Buck Converter with display
• NRF24L01+PA+LNA Wireless Module with Antenna
• HW411 LM2596 Buck Converter DC-DC Step Down Module
• XL6009 DC-DC Buck Boost Converter Module 3V-32V to 5V-35V 4A
• 5A XL4015 Module Adjustable Step Down DC To DC Buck Converter
• XL7015 DC-DC Step Down Module 5V-80V Converter