Arduino Mega TFT Shield Expansion Board For Touch Screen

@ expert peshawar

Arduino Mega TFT Shield Expansion Board For Touch Screen Display  is working at 3.3v voltage, it cannot be used directly on top of a standard Arduino board, so in order to make TFT LCD compatible for using on standard Arduino board, designed section TFT shield can be directly plugged into the Arduino board. Tft01 LCD 16 can support the current mode since there is sufficient mega2560 I/O while using only a touch screen interface or SD card interface, like in the case of face 328s will not exist.

 1,000.00

Only 1 left in stock

Category:

Arduino Mega TFT Shield Expansion Board For Touch Screen Display  is working at 3.3v voltage, it cannot be used directly on top of a standard Arduino board, so in order to make TFT LCD compatible for using on standard Arduino board, designed section TFT shield can be directly plugged into the Arduino board. Tft01 LCD 16 can support the current mode since there is sufficient mega2560 I/O while using only a touch screen interface or SD card interface, like in the case of face 328s will not exist.

Arduino Mega TFT Shield supports 8-bit mode, can use SD card interface and touch screen interface at the same time, adopts IC voltage division, makes the TFT display more stable. This Arduino Mega TFT Shield Arduino mega shield v2.2 is fit for 3.2 inch TFT LCD module; the Arduino Mega TFT Shield supports 16-bit mode; because of mega board have enough pins for using SD card and touch function at the same time. 3.2 inch TFT LCD shield, can be direct to the 3.2 ” TFT on the shields, can be compatible with the Arduino. Using this shield the users can now directly plug the LCD shields from 3.2″ to 5″ on to the Arduino mega board. This shield support 16-bit mode. Arduino mega board have enough pins for one to use SD card and touch function at the same time.

Using this TFT LCD Mega Expansion Shield V2.2 for Arduino MEGA the users can now directly plug the LCD shields from 3.2″ to 5″ on to the Arduino Mega board.
The shield Support: TFT 3.2” 4.3” 5.0” 7.0” The TFT01 LCD is now supported 16-bit mode, it will not exist encounter like in 328S, only using a set of SD card interface or touch screen interface for Arduino Mega256.

Features: –

  • This TFT LCD Screen Module, 40pins interface, not just a LCD screen but include the Touch, SD card and Flash design. So it’s a powerful extension module for your project.
  • The LCD has a wide viewing angle; the contrast is also very suitable.
  • TFT screen with SD card reader.
  • 65K true to life colors.
  • 240 x 320 QVGA resolutions.
  • Size: 3.2 inch
  • TFT LCD Mega Shield V2.2:
  • Because TFT01 LCD is working at 3.3V voltage, it cannot be used directly on top of a standard Arduino board, so in order to make TFT01 LCD compatible for using on standard Arduino board, designed section TFT Shield, can be directly plugged into the Arduino board that use TFT01 LCD module
  • TFT01 LCD 16 can support the current mode, since there is sufficient Mega2560 IO, while using only a touch screen interface or SD card interface, like in the case of face 328S will not exist.

Arduino Mega TFT Shield Specifications: –

  • Operating voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage: 6-20V
  • Digital I/O Pins: 54 (of which 14 provide PWM output)
  • Analog input Pins: 16
  • DC Current per I/O Pin: 40mA
  • DC Current for 3.3V pin: 50mA
  • Flash memory: 256KB of which 8KB used by bootloader
  • SRAM: 8KB
  • EEPROM: 4KB
  • Clock speed: 16MHz

Package: –

1 x Arduino Mega TFT Shield Expansion Board For Touch Screen

Related Products at majju.pk

Vendor Information

  • Store Name: expert.peshawar
  • Vendor: expert peshawar
  • Address: Market
    Peshawar
    Khyber Pakhtunkhwa
    25000
  • 5.00 5.00 rating from 2 reviews
Arduino Mega TFT Shield Expansion Board For Touch Screen
Arduino Mega TFT Shield Expansion Board For Touch Screen

 1,000.00

Majju PK
Logo
Reset Password
Shopping cart