HC-12 Wireless Serial Port Communication Module 433MHZ HC12 SI4463

HC-12 wireless serial port communication module is a new-generation multichannel embedded wireless data transmission module. Its wireless working frequency band is 433.4-473.0MHz, multiple channels can be set, with the stepping of 400 KHz, and there are totally 100 channels.

HC-12 Bluetooth module has a microcontroller which actually doesn’t have to be programmed by the user. For configuring the HC12 Wireless Module we simply use AT commands, which can be sent from an Arduino, a PC, or any other microcontroller using the serial port. For entering the AT command mode we just have to set the “Set” pin of the module to a low logic level.

The maximum transmitting power of module is 100mW (20dBm), the receiving sensitivity is -117dBm at baud rate of 5,000bps in the air, and the communication distance is 1,000m in open space.

With the HC-12 Bluetooth transceiver module you can send data between two devices at a great distance.
The module is equipped with an SI4463 Transceiver IC in combination with a STM8 microcontroller.
Communication via an Arduino is very easy via UART (RX and TX) signals.

it is very convenient for customers to go into application system. There is a PCB antenna pedestal ANT1 on the module, and user can use external antenna of 433M frequency band through coaxial cable; there is also an antenna solder eye ANT2 in the module, and it is convenient for user to weld spring antenna.

User could select one of these antennas according to use requirements. There is MCU inside the module, and user don’t need to program the module separately, and all transparent transmission mode is only responsible for receiving and sending serial port data, so it is convenient to use. 

Features: –

• Long-distance wireless transmission (1,000m in open space/baud rate 5,000bps in the air)
• Working frequency range (433.4-473.0MHz, up to 100 communication channels)
• Maximum 100mW (20dBm) transmitting power (8 gears of power can be set)
• Three working modes, adapting to different application situations
• Built-in MCU, performing communication with external device through serial port
• The number of bytes transmitted unlimited to one time
• Update software version through serial port

HC-12 Wireless Serial Port Communication Module Specifications: –

• Voltage: 3.2V – 5.5V DC
• Power consumption (peak, maximum): <200mA
• Power consumption (continuous, maximum): <100mA
• Frequency range: 433.4-473Mhz (adjustable in 100 separate channels)
• Built-in STM8 microcontroller for simple communication via RX and TX
• Distance (open air, maximum): 1000m (at 5000bps in open air*), 1800m (at 500 bps in open air in FU4 mode*)
• Transmission power: up to 100mW (adjustable)
• Receiver sensitivity (maximum): -117dBm (see datasheet)
• Baud rate adjustable from 1200 to 115200 (standard 9600)
• 433Mhz antenna included (separate, not soldered)
• Possibility for antenna via the uFL/IPEX connector
• Temperature range:  -40°C to +85°C

HC-12 Wireless Serial Port Communication Module Applications: –

• Wireless sensor
• Community building security
• Robot wireless control
• Industrial remote control and telemetering
• Automatic data acquisition
• Container information management
• POS system
• Wireless acquisition of gas meter data
• Vehicle keyless entry system
• PC wireless networking

HC-12 Wireless Serial Port Communication Module Datasheet: –

elecrow.com/download/HC-12.pdf

Package: –

1 x HC-12 Wireless Serial Port Communication Module

Related products at majju.pk

• RCWL-0516, Doppler Radar Microwave Sensor Switch Module
• 25Q128 SPI EEPROM MEMORY FLASH CHIP
• SOP SSOP 20 SMD Adapter Board 0.65mm/1.27mm 20 Pins Pitch IC
• PAM8403 Volume Control Mini 2 Channel 5v Audio Amplifier Circuit
• DS3231 Real Time Clock Module RTC Clock Module
• DS1307 Module V3.0 Tiny RTC I2C DS1307 AT24C32
• RTC DS1307 Tiny RTC Module I2C Real Time Clock Module
• STM8S003F3P6 STM8 Minimum Development Board In Pakistan
• XL4432-SMT SI4432 High Speed Wireless Transmission Module
• ADC-0808 Analog to Digital Converter