LM393 Soil Moisture Sensor Module

Sold by
sherjaan
@ sherjaan

LM393 Soil Moisture Sensor is compatible with a variety of microcontrollers, including Arduino. The LM393 Soil Moisture Sensor works on the principle of resistance. The two probes that are inserted into the soil have a resistance that changes depending on the moisture content of the soil.

 150.00

In stock

This LM393 Soil Moisture Sensor Module is a versatile and reliable sensor that can use in a variety of applications such as Agriculture , Gardening & Science experiments.

This LM393 Soil hygrometers typically have two probes that are inserted into the soil. The probes are made of a conductive material, such as metal or carbon. As the soil dries out, the resistance of the probes increases. This change in resistance can measure by the Arduino and use to determine the moisture content of the soil.

LM393 Soil Moisture Sensor has two output modes: digital and analog. The digital output mode provides a high or low signal, depending on the moisture content of the soil. The analog output mode provides a voltage signal that is proportional to the moisture content of the soil. The sensor is powered by a 3.3V to 5V supply. It is compatible with a variety of microcontrollers, including Arduino.

The LM393 Soil Moisture Sensor works on the principle of resistance. The two probes that are inserted into the soil have a resistance that changes depending on the moisture content of the soil. When the soil is dry, the probes have a high resistance. As the soil becomes moist, the resistance of the probes decreases.

The LM393 comparator chip compares the resistance of the two probes to a reference voltage. The reference voltage is typically set to 2.5V. If the resistance of the probes is greater than the reference voltage, the output of the LM393 chip is high. If the resistance of the probes is less than the reference voltage, the output of the LM393 chip is low.

The output of the LM393 chip can use to determine the moisture content of the soil. A high output indicates that the soil is dry, while a low output indicates that the soil is moist.

Features : –

This LM393 Soil Hygrometer is a sensor that can use to measure the moisture content of soil. It uses the LM393 comparator chip to measure the resistance of two probes that are inserted into the soil. The resistance of the probes decreases as the soil dries out, and the LM393 chip outputs a voltage signal that is proportional to the moisture content of the soil.

The LM393 Soil Hygrometer Sensor is a simple and easy-to-use sensor that can use to measure the moisture content of soil. It has a number of benefits, including:

  • Affordable: The LM393 Soil Hygrometer Sensor is a relatively inexpensive sensor, making it a good option for those on a budget.
  • Simple to use: The LM393 Soil Hygrometer Sensor is easy to set up and use. No programming or complex circuitry is required.
  • Versatile: The LM393 Soil Hygrometer Sensor can use in a variety of applications, including agriculture, gardening, and science experiments.
  • Reliable: The LM393 Soil Hygrometer Sensor is a reliable sensor that can provide accurate readings over a long period of time.

LM393 Soil Moisture Sensor Specifications : –

The LM393 Soil Hygrometer can power by a voltage range of 3.3V to 5V. The input voltage applied to the VCC pin of the sensor. The sensor will not work if the input voltage is outside of this range.

The LM393 Soil Hygrometer has two output modes: digital and analog. The digital output mode provides a high or low signal, depending on the moisture content of the soil. The analog output mode provides a voltage signal that is proportional to the moisture content of the soil.

The digital output mode is typically used with microcontrollers. The analog output mode can use with a variety of devices, including oscilloscopes and multimeters. Here are some of the specifications of the LM393 Soil Hygrometer Sensor:

  • Operating Voltage: 3.3V to 5V
  • Output: Digital and Analog
  • Sensitivity: Adjustable
  • Accuracy: ±10%
  • Temperature Range: 0°C to 60°C
  • Probe Length: 100mm
  • Probe Diameter: 3mm

LM393 Soil Moisture Sensor Pin Descriptions : –

The accuracy of the LM393 Soil Hygrometer Sensor is ±10%. This means that the sensor will be accurate to within 10% of the actual moisture content of the soil.

  • VCC: The VCC pin is the power supply pin of the sensor. It should connect to a voltage source of 3.3V to 5V.
  • GND: The GND pin is the ground pin of the sensor. It should connect to a common ground.
  • DO: The DO pin is the digital output pin of the sensor. It provides a high or low signal, depending on the moisture content of the soil. A high signal indicates that the soil is dry, while a low signal indicates that the soil is moist.
  • AO: The AO pin is the analog output pin of the sensor. It provides a voltage signal that is proportional to the moisture content of the soil. The voltage signal can read using an oscilloscope or multimeter.
  • S: The S pin is the sensitivity pin of the sensor. It can use to adjust the sensitivity of the sensor. The sensitivity determines how much the output of the sensor changes as the moisture content of the soil changes.
LM393 Soil Moisture Sensor Applications : –

The LM393 Soil Moisture Sensor can use in a variety of applications, including:

  • Agriculture: The sensor can use to monitor the moisture content of soil in agricultural fields. This information can use to determine when to irrigate the fields.
  • Gardening: The sensor can use to help you determine when to water your plants.
  • Science experiments: The sensor can use in science experiments to learn more about the relationship between soil moisture and plant growth.
  • Automated irrigation systems: The sensor can use to control automated irrigation systems. The system can program to turn on the water when the soil moisture reaches a certain level.
  • Weather stations: The sensor can use in weather stations to measure the moisture content of the soil. This information can use to predict the weather.
Package : –

1 x LM393 Soil Moisture Sensor

More Products at majju.pk

 

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “LM393 Soil Moisture Sensor Module”

Vendor Information

  • Store Name: sherjaan
  • Vendor: sherjaan
  • Address:
  • 5.00 5.00 rating from 6 reviews

You may also like…

LM393 Soil Moisture Sensor Module
LM393 Soil Moisture Sensor Module

 150.00

Majju PK
Logo
Reset Password
Shopping cart